Search results
Results from the WOW.Com Content Network
An 802.11n-only network may be impractical for many users because they need to support legacy equipment that still is 802.11b/g only. In a mixed-mode system, an optimal solution would be to use a dual-radio access point and place the 802.11b/g traffic on the 2.4 GHz radio and the 802.11n traffic on the 5 GHz radio. [20]
Preliminary 802.11n working became available in many routers in 2008. This technology can use multiple antennas to target one or more sources to increase speed. This is known as MIMO, Multiple Input Multiple Output. In tests, the speed increase was said to only occur over short distances rather than the long range needed for most point-to-point ...
Wireless LAN (WLAN) channels are frequently accessed using IEEE 802.11 protocols. The 802.11 standard provides several radio frequency bands for use in Wi-Fi communications, each divided into a multitude of channels numbered at 5 MHz spacing (except in the 45/60 GHz band, where they are 0.54/1.08/2.16 GHz apart) between the centre frequency of the channel.
You can communicate with a 801.11b at a rate of 11Mbits/s and a "g" at 54Mbits/s. If the "n" router supports the 5Ghz band you can also communicate with a 802.11a router/receiver at the rate of 54Mbits. With an "n" client you can connect with any router using their maximum speed except some 802.11a ones.
Most 802.11 compliant devices are backward compatible. However, 802.11ac runs at 5 GHz and requires an access point capable of 5 GHz operation. 802.11ac equipment is backward compatible with 802.11n, 802.11g, or 802.11b equipment. An older range extender will not be able to repeat the signal of a newer generation router.
This Linksys WRT54GS, a combined router and Wi‑Fi access point, operates using the 802.11g standard in the 2.4 GHz ISM band using signalling rates up to 54 Mbit/s. IEEE 802.11 Wi-fi networks are the most widely used wireless networks in the world, connecting devices like laptops (left) to the internet through a wireless router (right).
The BT Home Hub 3 incorporated WPS functionality, seen on other routers, which enables the user to connect to their encrypted network by the use of a "one touch" button, and also includes "smart wireless technology", which automatically chooses the wireless channel to give the strongest possible wireless signal. [10]
The revised unit includes an 802.11a/n (5 GHz) mode, which allows adding Draft-N to an existing 802.11b/g network without disrupting existing connections, while preserving the increased throughput that Draft-N can provide. [15] Up to 10 wireless units can connect to this AirPort Express.