Search results
Results from the WOW.Com Content Network
A jib or jib arm is the horizontal or near-horizontal beam used in many types of crane to support the load clear of the main support. [1] [2] An archaic spelling is gib. [3] Usually jib arms are attached to a vertical mast or tower or sometimes to an inclined boom.
A level-luffing crane is a crane mechanism where the hook remains at the same level while luffing: moving the jib up and down, so as to move the hook inwards and outwards relative to the base. [ 1 ] Usually the description is only applied to those with a luffing jib that have some additional mechanism applied to keep the hook level when luffing.
The jib was slewed by a mechanism on the ground, and bearings at the top of the tower and where the extension met the ground allowed it to turn. [ 1 ] [ 2 ] The winch on each arm was powered by two 52 horsepower (39 kW) electric motors for hoisting and two 14 horsepower (10 kW) motors for slewing, and a 18 horsepower (13 kW) motor for slewing ...
A jib crane is a type of crane - not to be confused with a crane rigged with a jib to extend its main boom - where a horizontal member (jib or boom), supporting a moveable hoist, is fixed to a wall or to a floor-mounted pillar. Jib cranes are used in industrial premises and on military vehicles.
In 2007, Tishman Construction Corporation of New York completed a row of steel columns at the perimeter of the construction site. Two tower crane bases were erected, each base containing a functioning luffing-jib tower crane. By the end of 2007, the tower's footings and foundations were nearly complete. [10]
The operator's cabin hosts a display showing the tower crane's position, movement and operating area. Where the tower crane’s operating area overlaps with other cranes or prohibited zones these are also displayed. The system alerts the operator when the crane is approaching a prohibited area or another crane. [9]
It was a luffing-jib tower crane manufactured by Favco that was 200 feet (61 m) tall at the time of the collapse. The accident occurred when workers were attaching a new steel collar to anchor it to the building at the 18th floor, as part of an operation to extend the crane upwards. [6]
Ships had increased in size by this time and the jib could no longer reach far enough to remove engines or boilers for repair work. It was even considered raising the crane up on a stone tower, as for the smaller crane at Canons Marsh opposite, to increase the lift height. In 1892, hydraulic machinery, including cranes, appeared in the docks ...