Search results
Results from the WOW.Com Content Network
Number 4 rebars spaced 12 inches on center (center-to-center distance) on both the top and bottom faces and in each way as well, i.e. longitudinal and transverse. (3) #4 Three number 4 rebars (usually used when the rebar perpendicular to the detail) #3 ties @ 9 OC, (2) per set Number 3 rebars used as stirrups, spaced at 9 inches on center.
A shop drawing is a drawing or set of drawings produced by the contractor, supplier, manufacturer, subcontractor, consultants, or fabricator. [1] Shop drawings are typically required for prefabricated components. Examples of these include: elevators, structural steel, trusses, pre-cast concrete, windows, appliances, cabinets, air handling units ...
Beam (structure) A statically determinate beam, bending (sagging) under a uniformly distributed load. A beam is a structural element that primarily resists loads applied laterally across the beam's axis (an element designed to carry a load pushing parallel to its axis would be a strut or column). Its mode of deflection is primarily by bending ...
Tensile strength (σt) Stronger than concrete. Reinforced concrete, also called ferroconcrete, is a composite material in which concrete 's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility.
Reinforced concrete column. (Redirected from Reinforced Concrete Column) A reinforced concrete column is a structural member designed to carry compressive loads, composed of concrete with an embedded steel frame to provide reinforcement. For design purposes, the columns are separated into two categories: short columns and slender columns.
Mechanical rebar connections, also known as mechanical splices or mechanical coupler, are used to join lengths of rebar together to transfer forces from one steel rebar to another. [1][2] Mechanical couplers can be advantageous in comparison with conventional methods of lap splicing because of the requirement for less steel for overlapping.
Rebar detailing is the discipline of preparing 'shop/placing' or 'fabrication' drawings or shop drawings of steel reinforcement for construction. Engineers prepare 'design drawings' that develop required strengths by applying rebar size, spacing, location, and lap of steel .
A general note applies generally and is not called out with flags. 2. Find number: "FN" meaning "find number" refers to the ordinal number that gives an ID tag to one of the constituents in a parts list (list of materials, bill of materials). Thus "fasten using FN7" refers to a fastener that is "find number" 7 in the list. FoS: feature of size