Search results
Results from the WOW.Com Content Network
FM channel 200, 87.9 MHz, overlaps TV 6. This is used only by K200AA.; TV 6 analog audio can be heard on FM 87.75 on most broadcast radio receivers as well as on a European TV tuned to channel E4A or channel IC, but at lower volume than wideband FM broadcast stations, because of the lower deviation.
A block upconverter (BUC) is used in the transmission of satellite signals. It converts a band of frequencies from a lower frequency to a higher frequency. Modern BUCs convert from the L band to K u band, C band and K a band. Older BUCs convert from a 70 MHz intermediate frequency (IF) to K u band or C band.
A satellite modem is not the only device needed to establish a communication channel. Other equipment that is essential for creating a satellite link include satellite antennas and frequency converters. Data to be transmitted are transferred to a modem from data terminal equipment (e.g. a computer).
The ASI output of a DVB Integrated Receiver/Decoder (IRD). It carries the entire MPEG transport stream being received from a DVB satellite feed entering the RF input (far left side in picture). Asynchronous Serial Interface, or ASI, is a method of carrying an MPEG Transport Stream over 75-ohm copper coaxial cable or optical fiber. [1]
A universal LNB has a switchable local oscillator frequency of 9.75/10.60 GHz to provide two modes of operation: low band reception (10.70–11.70 GHz) and high band reception (11.70–12.75 GHz). The local oscillator frequency is switched in response to a 22 kHz signal superimposed on the supply voltage from the connected receiver.
Main page; Contents; Current events; Random article; About Wikipedia; Contact us; Special pages; Help; Learn to edit; Community portal; Recent changes; Upload file
SAT>IP allows the satellite TV distribution to share a data network and enables display and viewing of the signals on any multimedia IP device equipped with suitable software. Multiple SAT>IP servers and clients can operate on the same network with both free-to-air and encrypted pay-TV transmissions.
Satellite subcarrier audio is audio transmitted by way of satellite that uses a separate analog or digital signal carried on a main radio transmission (usually video) on a specific satellite transponder. More technically, it is an already-modulated signal, which is then modulated into another signal of higher frequency and bandwidth.