Search results
Results from the WOW.Com Content Network
A heated hose consists of a flexible hose, through which the media is pumped. This hose determines the resistance against temperature and chemicals. A heating element is wrapped on the hose and then it is covered with insulation material. Possible insulation materials are Polyamid, steel wire or silicone. The heating element contains a heat ...
In jewelry production for "water welding" using a water torch (an oxyhydrogen torch whose gas supply is generated immediately by electrolysis of water). In automotive repair, removing a seized bolt. Formerly, to heat lumps of quicklime to obtain a bright white light called limelight, in theatres or optical ("magic") lanterns.
Heat-sensitive carbon fiber tubes coated with a UV curable powder coating. Powder coating is a type of coating that is applied as a free-flowing, dry powder.Unlike conventional liquid paint, which is delivered via an evaporating solvent, powder coating is typically applied electrostatically and then cured under heat or with ultraviolet light.
A BTU is the energy required to raise one pound of water by one degree Fahrenheit. A US gallon of water weighs 8.3 pounds (3.8 kg). To raise 230 L (60 US gal) of water from 10 °C (50 °F) to 50 °C (122 °F) at 90% efficiency requires 60 × 8.3 × (122 − 50) × 1.11 = 39,840 BTU. A 46 kW (157,000 BTU/h) heater, as might exist in a tankless ...
A water-based primer, used primarily on wood. A primer (/ ˈ p r aɪ m ər /) or undercoat is a preparatory coating put on materials before painting.Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted.
Hose link is a 1/4-turn bayonet-mount garden hose connection, which uses an o-ring to o-ring seal. It was designed by Hoselink, Pty, Ltd., Australia, [24] and patented in 1998. [25] It is popular in Australia, with limited distribution in the UK and the US, where it is distributed by Dayco Products, Inc.
The solvent also modifies the curing rate and viscosity of the paint in its liquid state. There are two types of paint: solvent-borne and water-borne paints. Solvent-borne paints use organic solvents as the primary vehicle carrying the solid components in a paint formulation, whereas water-borne paints use water as the continuous medium.
The binder is a combination of silica sol and water glass. The organic fraction is limited to 5 mass percent similar to dispersion silicate paint allowing for chemical setting and retaining of the silicate specific advantages. The sol silicate paint allows use on non-mineral plaster. [4] For these the bonding occurs chemically and physically.