Ads
related to: compression fitting vs threaded bolt tool for concrete hole
Search results
Results from the WOW.Com Content Network
A compression fitting 15 mm isolating valve. A compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. . In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings will be made of one or more compatible materials appropriate for the connect
Push-to-pull fittings are easily removed compression fitting that allows pipes to be connected with minimal tools. These fittings are similar to regular compression fittings but use an O-ring for sealing and a grip ring to hold the pipe. The main advantage is that it can easily be removed and re-used, it is easy to assemble, and the joints are ...
The main disadvantages of using such a tool are the inability to control the accuracy of the fit and the high probability of deformation of the walls where they should remain straight. The most common is a tool design with a die and a cone, which is screwed through the handle until the edges are separated at the required angle.
Nominal (thread) sizes range from 0.1875 to 0.375 in (4.763 to 9.525 mm) and lengths from 1.25 to 5 in (32 to 127 mm). Typically an installer uses a hammer drill to make a pilot hole for each concrete screw and a powered impact driver to drive the screw. The drill hole should be 1/2" longer than the depth penetration of the screw.
A chase nipple is a short pipe fitting, which creates a path for wires between two electrical boxes. A chase nipple has male threads on one end only. The other end is a hexagon. The chase nipple passes through the knockouts of two boxes, and is secured by an internally threaded ring called a lock nut. [1] [2]
Threaded sleeves: consist of a tube with an internal thread which is anchored back into the concrete. For all the type of the cast-in-place anchors, the load-transfer mechanisms is the mechanical interlock, [3] i.e. the embedded part of the anchors in concrete transfers and the applied load (axial or shear) via bearing pressure at
Ads
related to: compression fitting vs threaded bolt tool for concrete hole