Search results
Results from the WOW.Com Content Network
The M1077 and M1077A1 General Purpose A-frame flatracks are sideless flatracks used to transport pallets of ammunition and other classes of supplies. M1077 flatracks are 6.058 m long, 2.438 m wide, and 1.5915 m high over the A-frame. On the ISO-compatible Palletized Flatrack (IPF) Type M1 there are two end walls, one incorporating the A-frame.
Like the G 7.2, the G 7.3 was designed as a compound locomotive. A total of only fifteen of these locomotives were built between 1893 and 1895, all of them by Hanomag ; this was due to and increase in the permissible axle loads meant that the cheaper G 7.1s , without a front carrying axle, could also travel on these routes.
The Prussian G 7.2 was a class of 0-8-0 tender compound locomotives of the Prussian state railways.In the 1925 renumbering plan of Deutsche Reichsbahn, the former Prussian locomotives produced from 1895 to 1911 were given the class designation 55.7–13; while the locomotives of former Mecklenburgische Friedrich-Franz-Eisenbahn (MFFE) locomotives were classified as 55.57.
Blue Star multiple working equipment on a Class 40 locomotive A Class 73 and a Class 33 locomotive being coupled for multiple working. On the rail network in Great Britain, multiple working is where two or more traction units (locomotives, diesel multiple units or electric multiple units) are coupled together in such a way that they are all under the control of one driver (multiple-unit train ...
The G63 AMG 6x6 features six-wheel drive running on 5.5L, 536-hp, 561-lb-ft twin-turbo DOHC 32-valve V-8 AMG engine. The G63 AMG 6x6 is fitted with Mercedes' 7G-tronic seven-speed automatic transmission ; its transfer case can alter between a 0.87:1 high-range ratio for on-road driving and 2.16:1 low-range ratio for off-road conditions to all ...
In heavy trucks, tandem refers to two closely spaced axles. Legally defined by the distance between the axles (up to 2.5 m (8 ft 2 + 3 ⁄ 8 in) in the European Union, 40–96 inches (1.02–2.44 m) in the United States), mechanically there are many configurations. Either or both axles may be powered, and often interact with each other.
Winters altered the original EZ Flyer design by creating a new centre wing section to mount two powerplants instead of one, increasing the wingspan to 35.5 feet (10.8 m) and the wing area to 235 sq ft (21.8 m 2). The fuselage was also stretched 2.0 ft (1 m) to 23 ft (7 m) total, to give a more unimpeded view from the front seat.
These models of trucks were produced in 27,500 lb (12,500 kg) to 60,920 lb (27,630 kg) Gross Vehicle Weight Ratings (the loaded weight of the truck), with both single and tandem rear axle models. The Fleetstar line was larger than the Loadstar (International's medium duty lineup during this time) and smaller than the Paystar (severe service ...