Search results
Results from the WOW.Com Content Network
RTI ramp Modified Jeep ramping an RTI ramp Ramp travel index or RTI, is a way of measuring a vehicle's ability to flex its suspension, a property also known as axle articulation. The RTI rating is used mainly in the off-roading industry to test and describe chassis limits of modified vehicles.
For example, a 20-inch (510 mm) rise requires a minimum of 20 feet (6.10 m) in length of ramp. Additionally, ADA limits the longest single span of ramp, prior to a rest or turn platform, to 30 feet (9.14 m). [2] [3] Ramps can be as long as needed, but no single run of ramp can exceed 30 feet (9.14 m).
Ultralow strength: characterized by K = 20 MN/m^3 and representing all K values below 25 MN/m^3 for rigid pavements, and by CBR = 3 and representing all CBR values below 4 for flexible pavements D: Maximum allowable tire pressure: Unlimited: no pressure limit W: High: limited to 1.75 MPa X: Medium: limited to 1.25 MPa Y: Low: limited to 0.50 MPa Z
Example: If the height of a ramp is H = 1 meter and its length is L = 5 meters, then the mechanical advantage is = =, which means that a 20 lb force will lift a 100 lb load. The Liverpool Minard inclined plane has the dimensions 1804 meters by 37.50 meters, which provides a mechanical advantage of
β° = Breakover angle; C = Underside of chassis; W = Wheel; G = Ground; M = Midpoint of wheelbase Example of a vehicle at a significant breakover angle.. Breakover angle or rampover angle is the maximum possible supplementary angle (usually expressed in degrees) that a vehicle, with at least one forward wheel and one rear wheel, can drive over without the apex of that angle touching any point ...
Approach angle is the maximum angle of a ramp onto which a vehicle can climb from a horizontal plane without interference. [ 1 ] It is defined as the angle between the ground and the line drawn between the front tire and the lowest-hanging part of the vehicle at the front overhang .
Thus, it is the ratio between height and transition radius that determines the personality of a given ramp, because the ratio determines the angle of the lip. [ 4 ] On half-pipes which are less than vertical, the height, typically between 50% and 75% of the radius, profoundly affects the ride up to and from the lip, and the speed at which ...
as a ratio of one part rise to so many parts run. For example, a slope that has a rise of 5 feet for every 1000 feet of run would have a slope ratio of 1 in 200. (The word "in" is normally used rather than the mathematical ratio notation of "1:200".) This is generally the method used to describe railway grades in Australia and the UK.