Search results
Results from the WOW.Com Content Network
For example, factory and aftermarket receivers using the Remington 700 footprint are produced with various types of action threads, all with a 26.99 mm (1 + 1 ⁄ 16 in) diameter, but with a pitch of either a 1.588 mm (16 TPI, Remington standard), 1.411 mm (18 TPI) or 1.270 mm (20 TPI, Savage standard).
The bolt and extractor are designed and patented by Robinson Arms, and promoted as offering higher performance over eight lug M16/M4 type bolts. Other features include a folding stock, telescoping M4 Carbine style stocks, monolithic top Picatinny rail with side and under-barrel rails, and forward assist integrated into left-side charging handle.
A disassembled Mauser action showing a partially disassembled receiver and bolt. In firearms terminology and law, the firearm frame or receiver is the part of a firearm which integrates other components by providing housing for internal action components such as the hammer, bolt or breechblock, firing pin and extractor, and has threaded interfaces for externally attaching ("receiving ...
The Remington Model 597 is an American semi-automatic rifle that was manufactured by Remington Arms at the company's Mayfield, Kentucky and Huntsville, Alabama plant. The .22 Long Rifle version has a removable 10-round magazine, while the magazines for the larger .22 WMR and .17 HMR cartridges hold eight rounds.
The receiver cover hinges at the front of the frame and latches onto the rear of the bolt assembly. The bolt assembly consists of a cast steel bolt that rides on a spring and follower; a thin firing pin channel runs down the center of the bolt, allowing the stamped firing pin to be struck by the hammer and impact the cartridge at the front of ...
A rail system mounted on top of a SIG SG 550 A dovetail rail on a rifle receiver for mounting a sight. A rail integration system (RIS; also called a rail accessory system (RAS), rail interface system, rail system, mount, base, gun rail, or simply a rail [1]) is a generic term for any standardized attachment system for mounting firearm accessories via bar-like straight brackets (i.e. "rails ...
The screw thread sizes and "genders" used for attaching brushes to the rods vary between different calibers and manufacturers. Some of the most common threads and genders for rods/cords are listed below. [1] Corresponding brushes and other accessories will have the opposite gender. Rods for .17 to .204 caliber (4.4 to 5.2 mm) #5-40 UNC female
Standard: 22 in (560 mm) alloy steel sporter barrel, with an overall length of 42 in (1,100 mm) for short-action or 42.5 inches (1,080 mm) for long-action cartridges. Compact : 18 in (460 mm) alloy steel sporter barrel, shorter length of pull than the standard model, with an overall length of 36.75 in (933 mm), and chambered for short-action ...