Search results
Results from the WOW.Com Content Network
A short antenna pole next to a house Multiple Yagi TV aerials. Antennas are commonly placed on rooftops and sometimes in attics. Placing an antenna indoors significantly attenuates the level of the available signal. [19] [20] Directional antennas must be pointed at the transmitter they are receiving; in most cases great accuracy is not needed ...
The system consists of a master antenna and a matching transformer to match the balanced antenna with unbalanced cable and amplifiers. [5] Most antennas have an impedance of around 300 Ω. To convert it to 75 Ω, a matching transformer (or balun) is used. For trunk line isolation, a resistive inductive device known as a splitter is used.
Channel Master's original product was a prefabricated television aerial with hinged elements which would unfold and snap into place; this patented design greatly reduced installation time as existing antenna designs at the time had to be bolted together from multiple pieces by rooftop installers. [17]
A distributed antenna system (DAS) is a network of spatially separated antenna nodes connected to a common source via a transport medium that provides wireless service within a geographic area or structure. DAS antenna elevations are generally at or below the clutter level, and node installations are compact. A distributed antenna system may be ...
In the case of an AM broadcasting station (mediumwave and longwave, occasionally shortwave), the multiple mast radiators may all be part of an antenna system for a single station, while for VHF and UHF the site may be under joint management. Alternatively, a single tower with many separate antennas is often called a "candelabra tower". [6]
Often random wire antennas are also (inaccurately) referred to as long-wire antennas.There is no accepted minimum size, but actual long-wire antennas must be greater than at least a quarter-wavelength ( 1 / 4 λ) or perhaps greater than a half ( 1 / 2 λ) at the frequency the long wire antenna is used for, and even a half-wave may only be considered "long-ish" rather than "truly ...
An indoor antenna is a type of radio or TV antenna placed indoors, as opposed to being mounted on the roof. They are usually considered a simple and cheap solution to receive transmissions. An indoor antenna is prone to picking up electrical noise, but digital broadcasts are resistant to this noise.
The first technique developed was the far-field range, where the antenna under test (AUT) is placed in the far-field of a range antenna. Due to the size required to create a far-field range for large antennas, near-field techniques were developed, which allow the measurement of the field on a distance close to the antenna (typically 3 to 10 ...