Search results
Results from the WOW.Com Content Network
The strength of the vacuum produced depends on the velocity and shape of the fluid jet and the shape of the constriction and mixing sections, but if a liquid is used as the working fluid, the strength of the vacuum produced is limited by the vapor pressure of the liquid (for water, 3.2 kPa or 0.46 psi or 32 mbar at 25 °C or 77 °F). If a gas ...
The installation, maintenance and repair of deep well hand pumps is more complicated than with other hand pumps. A deep well hand pump theoretically has no limit to which it can extract water. In practice, the depth is limited by the physical power a human being can exert in lifting the column of water, which is around 30 m
The company, known as Downs & Company until 1869, cast and assembled the world's first all-metal pump in 1849. [17] In 1869, the Goulds name was added, and the company became known as Goulds Manufacturing Company. The Gould family ran the operation from 1872 until 1964, renaming the company Goulds Pumps Incorporated in 1926.
A small, electrically powered pump A large, electrically driven pump for waterworks near the Hengsteysee, Germany. A pump is a device that moves fluids (liquids or gases), or sometimes slurries, [1] by mechanical action, typically converted from electrical energy into hydraulic or pneumatic energy.
Another example is the pump-jet, which is used for marine propulsion. Jet pumps are also used to circulate reactor coolant in several designs of boiling water nuclear reactor . In power generation, this phenomenon is used in steam jet air ejectors to maintain condenser vacuum by removing non-condensible gases from the condenser.
The S type pump is useful for removing water from a well or container. Shallow well pumps are those in which the jet assembly is attached directly to the main pump and are limited to a depth of approximately 5-8m to prevent cavitation. Deep well pumps are those in which the jet is located at the bottom of the well. The maximum depth for deep ...
Self-priming pumps have to be capable of evacuating air from the pump suction line without any external auxiliary devices. Centrifugal pumps with an internal suction stage such as water-jet pumps or side-channel pumps are also classified as self-priming pumps. [10] Self-Priming centrifugal pumps were invented in 1935.
Variable speed pumps were replaced with two-speed pumps (each rated at 35,400 US gallons per minute (2.23 m 3 /s) for a discharge pressure head of 865 feet (264 m)), and a flow control valve (adjustable from 22% open to 100% open with a linear flow response) was added to each loop for use in regulating recirculation flow (capable of regulating ...