Ad
related to: ddr2 sdram depth chart
Search results
Results from the WOW.Com Content Network
PC2-5300 DDR2 SO-DIMM (for notebooks) Comparison of memory modules for desktop PCs (DIMM) Comparison of memory modules for portable/mobile PCs (SO-DIMM) The key difference between DDR2 and DDR SDRAM is the increase in prefetch length. In DDR SDRAM, the prefetch length was two bits for every bit in a word; whereas it is four bits in DDR2 SDRAM.
The prefetch buffer depth can also be thought of as the ratio between the core memory frequency and the IO frequency. ... Typical DDR2 SDRAM clock rates are 200, 266 ...
DDR2 was in turn superseded by DDR3 SDRAM, which offered higher performance for increased bus speeds and new features. DDR3 has been superseded by DDR4 SDRAM, which was first produced in 2011 and whose standards were still in flux (2012) with significant architectural changes. DDR's prefetch buffer depth is 2 (bits), while DDR2 uses 4.
Double data rate SDRAM (DDR SDRAM or DDR) was a later development of SDRAM, used in PC memory beginning in 2000. Subsequent versions are numbered sequentially (DDR2, DDR3, etc.). DDR SDRAM internally performs double-width accesses at the clock rate, and uses a double data rate interface to transfer one half on each clock edge. DDR2 and DDR3 ...
Notch positions on DDR (top) and DDR2 (bottom) DIMM modules. On the bottom edge of 168-pin DIMMs there are two notches, and the location of each notch determines a particular feature of the module. The first notch is the DRAM key position, which represents RFU (reserved future use), registered , and unbuffered DIMM types (left, middle and right ...
(memory depth) × (memory width) Memory depth is the memory density divided by memory width. Example: for a memory chip with 128 Mib capacity and 8-bit wide data bus, it can be specified as: 16 Meg × 8. Sometimes the "Mi" is dropped, as in 16×8. (memory depth per bank) × (memory width) × (number of banks)
Two types of DIMMs (dual in-line memory modules): a 168-pin SDRAM module (top) and a 184-pin DDR SDRAM module (bottom). Memory modules of SK Hynix. In computing, a memory module or RAM stick is a printed circuit board on which memory integrated circuits are mounted.
The naming convention for DDR, DDR2 and DDR3 modules specifies either a maximum speed (e.g., DDR2-800) or a maximum bandwidth (e.g., PC2-6400). The speed rating (800) is not the maximum clock speed, but twice that (because of the doubled data rate). The specified bandwidth (6400) is the maximum megabytes transferred per second using a 64-bit width.
Ad
related to: ddr2 sdram depth chart