Search results
Results from the WOW.Com Content Network
Primary lens: The objective of a refracting telescope. Primary mirror: The objective of a reflecting telescope. Corrector plate: A full aperture negative lens placed before a primary mirror designed to correct the optical aberrations of the mirror. Schmidt corrector plate: An aspheric-shaped corrector plate used in the Schmidt telescope.
A simple example of an afocal optical system is an optical telescope imaging a star, the light entering the system is from the star at infinity (to the left) and the image it forms is at infinity (to the right), i.e., the collimated light is collimated by the afocal system. [2]
Alvan Clark & Sons made the 36-inch (910 mm) objective lens for the Lick Observatory refractor, shown here in an 1889 drawing. The telescope was designed and built by the Warner & Swasey Company Alvan Clark & Sons was an American maker of optics that became famous for crafting lenses for some of the largest refracting telescopes of the 19th and ...
Afocal photography works with any system that can produce a virtual image of parallel light, for example telescopes and microscopes. Afocal photographic setups work because the imaging device's eyepiece produces collimated light and with the camera's lens focused at infinity, creating an afocal system with no net convergence or divergence in the light path between the two devices. [2]
A refracting telescope (also called a refractor) is a type of optical telescope that uses a lens as its objective to form an image (also referred to a dioptric telescope). The refracting telescope design was originally used in spyglasses and astronomical telescopes but is also used for long-focus camera lenses .
A triplet lens A Steinheil triplet telescope eyepiece. The three lenses may be cemented together, as in the Steinheil triplet (optimized for finite conjugate ratio) or the Hastings triplet (optimized for infinite conjugate ratio). [2] Or a triplet may be designed with three spaced glasses, as in the Cooke triplet. The former has the advantage ...
For example, the position and angle of lenses may be adjusted to guide a laser through the path required. Optical instruments like microscopes, telescopes, and DSLRs all have optical trains that guide the incoming light towards a detector or the eye of an observer. The optical train of a telescope is commonly called an optical tube assembly (OTA).
The lenses usually come from defective or old photocopiers, allowing for the objective to be obtained for free or at a low cost. They are usually modest diameter lenses, ranging from 50mm to 60mm, of short focal length, good for use in a portable, wide-field telescope, but unsuitable for higher magnifications. Given the use of good components ...