Search results
Results from the WOW.Com Content Network
The input voltage source and the resistor R constitute an imperfect current source passing current, I R through the load (Fig. 3 in the source). The INIC acts as a second current source passing "helping" current, I −R, through the load. As a result, the total current flowing through the load is constant and the circuit impedance seen by the ...
Source transformations are easy to compute using Ohm's law.If there is a voltage source in series with an impedance, it is possible to find the value of the equivalent current source in parallel with the impedance by dividing the value of the voltage source by the value of the impedance.
Or if the current is forced to some value I, then the measured voltage V divided by that current I is also R. Since the plot of I versus V is a straight line, then it is also true that for any set of two different voltages V 1 and V 2 applied across a given device of resistance R, producing currents I 1 = V 1 /R and I 2 = V 2 /R, that the ratio ...
The simplest I–V curve is that of a resistor, which according to Ohm's law exhibits a linear relationship between the applied voltage and the resulting electric current; the current is proportional to the voltage, so the I–V curve is a straight line through the origin with positive slope.
The current entering any junction is equal to the current leaving that junction. i 2 + i 3 = i 1 + i 4. This law, also called Kirchhoff's first law, or Kirchhoff's junction rule, states that, for any node (junction) in an electrical circuit, the sum of currents flowing into that node is equal to the sum of currents flowing out of that node; or equivalently:
The factor β(R L /R S) is the current feedback provided by the voltage feedback source of voltage gain β V/V. For instance, for an ideal current source with R S = ∞ Ω, the voltage feedback has no influence, and for R L = 0 Ω, there is zero load voltage, again disabling the feedback.
A simple electric circuit made up of a voltage source and a resistor. Here, =, according to Ohm's law. An electrical network is an interconnection of electrical components (e.g., batteries, resistors, inductors, capacitors, switches, transistors) or a model of such an interconnection, consisting of electrical elements (e.g., voltage sources, current sources, resistances, inductances ...
Also called chordal or DC resistance This corresponds to the usual definition of resistance; the voltage divided by the current R s t a t i c = V I. {\displaystyle R_{\mathrm {static} }={V \over I}.} It is the slope of the line (chord) from the origin through the point on the curve. Static resistance determines the power dissipation in an electrical component. Points on the current–voltage ...