Search results
Results from the WOW.Com Content Network
14.50377 psi Atmospheres 0.986923 atm: The bar is a metric unit of pressure defined as 100,000 Pa (100 kPa ...
common-rail Fuel Stratified Injection (FSI) high-pressure direct injection between 30 and 100 bar (435 and 1,450 psi) aspiration & exhaust system variable intake manifold, two ceramic catalytic converters dimensions length: 360 mm (14.2 in), width: 430 mm (16.9 in), mass: 169.5 kg (374 lb) DIN-rated motive power & torque outputs
1.5 psi Pressure increase per meter of a water column [26] 10 kPa 1.5 psi Decrease in air pressure when going from Earth sea level to 1000 m elevation [citation needed] +13 kPa +1.9 psi High air pressure for human lung, measured for trumpet player making staccato high notes [48] < +16 kPa +2.3 psi
Most pressure cookers have a cooking (operating) pressure setting between 0.8–1 bar (11.6–15 psi) (gauge) so the pressure cooker operates at 1.8 to 2.0 bar (absolute). The standard cooking pressure of 15 psi gauge was determined by the United States Department of Agriculture in 1917.
Alpina B7 (G12) rear view. The B7 Bi-Turbo is based on the 750Li and uses a modified version of its 4.4-litre twin-turbocharged V8 engine designated the N63M30.The engine is modified by the addition of modified twin-scroll turbochargers having larger inlet and outer dimensions and new compressors for an increased boost pressure of 1.4 bar (20 psi), replacement of the standard pistons with high ...
A 2001 NHTSA study found that 40% of passenger cars have at least one tire under-inflated by 0.4 bars (6 psi) or more. [1] The number one cause of tire failure was determined to be under-inflation. Drivers are encouraged to make sure their tires are adequately inflated at all times.
1 ⁄ 4 mile (402 m) performance was listed at 15.9 seconds at stock boost levels of 10 psi (0.69 bar), while for the same year, the Chevrolet Camaro V6 was listed at 17.0 and the Chevrolet Corvette at 15.2 seconds. [20] For 1985, the Grand National remained unchanged. 1987 Buick Regal Grand National Engine.
The first oxygen converters in the US were launched at the end of 1954 by McLouth Steel in Trenton, Michigan, which accounted for less than 1% of the national steel market. [3] U.S. Steel and Bethlehem Steel introduced the oxygen process in 1964. [3] By 1970, half of the world's and 80% of Japan's steel output was produced in oxygen converters. [3]