Search results
Results from the WOW.Com Content Network
The American Wood Protection Association (AWPA) recommends that all treated wood be accompanied by a Consumer Information Sheet (CIS), to communicate safe handling and disposal instructions, as well as potential health and environmental hazards of treated wood.
Chromated copper arsenate (CCA) is a wood preservative containing compounds of chromium, copper, and arsenic, in various proportions.It is used to impregnate timber and other wood products, especially those intended for outdoor use, in order to protect them from attack by microbes and insects.
The copper in ACQ treated wood accelerates corrosion of galvanized steel fasteners (such as nails and screws) 10 times or more in comparison with CCA-treated wood. Stainless steel (AISI 316) is not affected. [7] Aluminium and Galvalum fasteners should be avoided. [8] One should use fasteners made of hot-dipped galvanized steel, copper, or ...
Provide LEV under the blade slot. To increase the collection area of the hood, add holes (1/8 inch in diameter) in the table around the ot area. [3] To collect wood dust from the saw teeth, place a suction nozzle above the table, at the rear of the w blade. [3] Jointers. Place a hood underneath the machine head. [3] Shapers
Finally, consideration needs to be given to whether the finished wood will come into contact with food, in which case a food-safe finish should be used, [16] local environmental regulations governing the use of finishes, [17] and recycling of finished wood at the end of its life. [18]
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
There may be a stigma associated with using "used" or "cheap" wood that is perceived to be of not as high quality as "new" wood. Not all pieces of wood in a dismantled building will fit in a new building, and it may be cheaper and easier, from a design and labor perspective, to simply get new wood (ex: wood from a 6-foot (1.8 m) deck being used ...
In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 inch.