Search results
Results from the WOW.Com Content Network
Invented in 1969, the I-joist is an engineered wood product that has great strength in relation to its size and weight. The biggest notable difference from dimensional lumber is that the I-joist carries heavy loads with less lumber than a dimensional solid wood joist. [1] As of 2005, approximately 50% of all wood light framed floors used I-joists.
In dimensioned lumber construction, the rim joists are the same depth, thickness and material as the joists themselves; in engineered wood construction, the rim joists may be oriented strand board (OSB), plywood or an engineered wood material varying in thickness from 1 inch (25 mm) to as much as 1 + 3 ⁄ 4 inches (44 mm), though they are ...
The ANSI/APSP (Association of Pool & Spa Professionals) standards used for pools, spas, hot tubs, barriers, and suction entrapment avoidance. The ANSI/HI (Hydraulic Institute) standards used for pumps. The ANSI for eye protection is Z87.1, which gives a specific impact resistance rating to the eyewear. This standard is commonly used for shop ...
The term binding joist is sometimes used to describe beams at floor level running perpendicular to the ridge of a gable roof and joined to the intermediate posts. Joists which land on a binding joist are called bridging joists. [4] [5] A large beam in the ceiling of a room carrying joists is a summer beam. A ceiling joist may be installed flush ...
These members have been standardized for depths from 20 to 120 inches (510 to 3,050 mm), and spans to 120 feet (37,000 mm). The standard depth at the bearing ends has been established at 7 + 1 ⁄ 2 inches (190 mm) for all Joist Girders. Joist Girders are usually attached to the columns by bolting with two 3 ⁄ 4 inch (19 mm) diameter A325 ...
ISO 3864-4:2011 Part 4: Colorimetric and photometric properties of safety sign materials [4] Part 1 explains how to layout the components of safety signage, dictate the color scheme and sizing information. Part 2 covers the same concepts as part one, but specifically for labels applied on machinery, vehicles and consumer goods.
The modern standard can trace its roots to the military standard MIL-STD-8 published in 1949. [4] It was revised by MIL-STD-8A in 1953, which introduced the concept of modern GD&T "Rule 1". [ 5 ] [ 6 ] Further revisions have continued to add new concepts and address new technology like computer aided design and model-based definition .
The later color video version is RS-170A which shows color burst and the 4 color field sequence of NTSC. The RS-170A version is only a tentative standard, and was never formally adopted. NAB Engineering Handbook Seventh Edition. [1] EIA-189A Formerly RS-189A. Encoded color bar signal (preceded SMPTE color bars). EIA-198 EIA RS-198-A? EIA RS-198 ...