Search results
Results from the WOW.Com Content Network
The clear cut definition of light and heavy crude varies because the classification is based more on practical grounds than theoretical. The New York Mercantile Exchange (NYMEX) defines light crude oil for domestic U.S. oil as having an API gravity between 37° API (840 kg/m 3) and 42° API (816 kg/m 3), while it defines light crude oil for non-U.S. oil as being between 32° API (865 kg/m 3 ...
Crude oil is classified as light, medium, or heavy according to its measured API gravity. Light crude oil has an API gravity higher than 31.1° (i.e., less than 870 kg/m 3) Medium oil has an API gravity between 22.3 and 31.1° (i.e., 870 to 920 kg/m 3) Heavy crude oil has an API gravity below 22.3° (i.e., 920 to 1000 kg/m 3)
Crude oil is considered "heavy" if it has long hydrocarbon chains, or "light" if it has short hydrocarbon chains: an API gravity of 34 or higher is "light", between 31 and 33 is "medium", and 30 or below is "heavy". Crude is considered "sweet" if it is low in sulphur content (< 0.5%/weight), or "sour" if high (> 1.0%/weight). Generally, the ...
2 per unit of energy than does coal or oil, but more than natural gas. It emits 81% of the CO 2 per kWh produced by oil, 70% of that of coal, and less than 50% of that emitted by coal-generated electricity distributed via the grid. [40] Being a mix of propane and butane, LPG emits less carbon per joule than butane but more carbon per joule than ...
GLR – gas-liquid ratio; GLT – GLT log [clarification needed] GLV – gas lift valve; GLW – [citation needed] GM – gas migration; GOC – gas oil contact; GOM – Gulf of Mexico; GOP – geological operations report; GOR – gas oil ratio; GOSP – gas/oil separation plant; GPIT – general-purpose inclinometry tool (borehole survey) [16]
In the last column, major departures of solids at standard temperatures from the Dulong–Petit law value of 3 R, are usually due to low atomic weight plus high bond strength (as in diamond) causing some vibration modes to have too much energy to be available to store thermal energy at the measured temperature. For gases, departure from 3 R per ...
Accidental release source terms are the mathematical equations that quantify the flow rate at which accidental releases of liquid or gaseous pollutants into the ambient environment which can occur at industrial facilities such as petroleum refineries, petrochemical plants, natural gas processing plants, oil and gas transportation pipelines, chemical plants, and many other industrial activities.
In liquids it usually decreases with increasing temperature, whereas, in most gases, viscosity increases with increasing temperature. This article discusses several models of this dependence, ranging from rigorous first-principles calculations for monatomic gases , to empirical correlations for liquids.