Search results
Results from the WOW.Com Content Network
Sealing is the final step in the anodizing process. Acidic anodizing solutions produce pores in the anodized coating. These pores can absorb dyes and retain lubricants but are also an avenue for corrosion. When lubrication properties are not critical, they are usually sealed after dyeing to increase corrosion resistance and dye retention.
anodizing – electrolytic passivation process used to increase the thickness of the natural oxide layer, producing a porous surface which can accept organic or inorganic dyes easily. In the case of titanium, niobium, and stainless steel, the colour formed is dependent on the thickness of the oxide (which is determined by the anodizing voltage).
Anodizing; Anti-climb paint; Anti-graffiti coating; ... Dimethylolpropionic acid; Dip-coating; E. Electrochemical coloring of metals; Electroless nickel-boron plating;
lactic acid 126ml/lit copper anodes, 0.25/A per square foot, gives various colors on copper and alloys, depending on the duration of the process, a large number of variations on this process have been developed, the most famous is the American Elektrocolor process developed by J.E.Stareck, Russian literature mentions more than 10 variants [ 22 ...
For aluminum, the chromate conversion bath can be simply a solution of chromic acid. The process is rapid (1–5 min), requires a single ambient temperature process tank and associated rinse, and is relatively trouble free. [2] As of 1995, Henkel's Alodine 1200s commercial formula for aluminum consisted of 50-60% chromic anhydride CrO
Electrophoretic Deposition Process. Electrophoretic deposition (EPD), is a term for a broad range of industrial processes which includes electrocoating, cathodic electrodeposition, anodic electrodeposition, and electrophoretic coating, or electrophoretic painting.
The salt spray test (or salt fog test) is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surface coatings.Usually, the materials to be tested are metallic (although stone, ceramics, and polymers may also be tested) and finished with a surface coating which is intended to provide a degree of corrosion protection to the underlying metal.
Oxalic acid can be used to clean minerals like many other acids. Two such examples are quartz crystals and pyrite. [54] [55] [56] Oxalic acid is sometimes used in the aluminum anodizing process, with or without sulfuric acid. [57] Compared to sulfuric-acid anodizing, the coatings obtained are thinner and exhibit lower surface roughness.