Search results
Results from the WOW.Com Content Network
The aeration stage and the disinfecting stage are the primary differences from a traditional septic system; in fact, an aerobic treatment system can be used as a secondary treatment for septic tank effluent. [1] These stages increase the initial cost of the aerobic system, and also the maintenance requirements over the passive septic system.
Most onsite wastewater treatment systems are of the conventional type, consisting of a septic tank and a subsurface wastewater infiltration system (SWIS). Site limitations and more stringent performance requirements have led to significant improvements in the design of wastewater treatment systems and how they are managed.
Other filter media that have been introduced to the residential swimming pool market since 1970 include sand particles and paper type cartridge filters of 50 to 150 square feet (4.6 to 13.9 m 2) filter area arranged in a tightly packed 12" diameter x 24" long (300 mm x 600 mm) accordion-like circular cartridge. These units can be 'daisy-chained ...
Floating surface aerators work in a similar manner to fountains, but they do not offer the same aesthetic appearance. They extract water from the top 1–2 feet of the water body and utilize air-water contact to transfer oxygen. Instead of propelling water into the air, they disrupt the water at the water surface.
A septic tank is an underground chamber made of concrete, fiberglass, or plastic through which domestic wastewater flows for basic sewage treatment. [2] Settling and anaerobic digestion processes reduce solids and organics, but the treatment efficiency is only moderate (referred to as "primary treatment"). [2]
Sewage treatment plant (a type of wastewater treatment plant) in La Crosse, Wisconsin. Wastewater treatment is a process which removes and eliminates contaminants from wastewater. It thus converts it into an effluent that can be returned to the water cycle. Once back in the water cycle, the effluent creates an acceptable impact on the environment.
Sludge treatment technologies that are used for thickening or dewatering of sludge have two products: the thickened or dewatered sludge, and a liquid fraction which is called sludge treatment liquids, sludge dewatering streams, liquors, centrate (if it stems from a centrifuge), filtrate (if it stems from a belt filter press) or similar.
After treatment, the effluent may be returned to surface water or reused as irrigation water (or reclaimed water) if the effluent meets the required effluent standards (e.g. sufficiently low levels of pathogens). Waste stabilization ponds involve natural treatment processes which take time because removal rates are slow.