Search results
Results from the WOW.Com Content Network
The nut is located on a threaded rod on the mill head. The machine operator moves it up or down by rotating it clockwise (to move it down) or counter-clockwise (to move it up). Moving the nut down increases the depth to which the cutting tool may plunge into the workpiece. Moving the nut up reduces the depth to which the cutting tool may plunge ...
A locknut, also known as a lock nut, locking nut, self-locking nut, prevailing torque nut, [1] stiff nut [1] or elastic stop nut, [2] is a nut that resists loosening under vibrations and torque. Prevailing torque nuts have some portion of the nut that deforms elastically to provide a locking action. [ 2 ]
Lock nut, lock-ring, or thimble lock: The knurled component (or lever) that one can tighten to hold the spindle stationary, such as when momentarily holding a measurement. Thimble: The component that one's thumb turns. Screw: (Not visible) The heart of the micrometer, as explained under "Operating principles". It is inside the barrel.
Micrometer adjuster with differential threads. The threads 11 on rod 4 have one pitch (e.g. 25 tpi, blue ), while the threads 10 in the barrel 1 have another (e.g. 20 tpi, orange ). A full turn of the thimble 12 rotates the nut sleeve 13 and its two threads ( 20 tpi outside and 25 tpi inside ) to move the rod 1 / 20 - 1 / 25 = 0.01 in (0.25 mm ...
Standard nut employed as a jam nut against another standard nut. A jam nut is a low profile type of nut, typically half as tall as a standard nut. It is commonly used as a type of locknut, where it is "jammed" up against a standard nut to lock the two in place. It is also used in situations where a standard nut would not fit.
Channel length Oxide thickness [1] MOSFET logic Researcher(s) Organization Ref; June 1960: 20,000 nm: 100 nm: PMOS: Mohamed M. Atalla, Dawon Kahng: Bell Telephone Laboratories [2] [3] NMOS: 10,000 nm: 100 nm: PMOS Mohamed M. Atalla, Dawon Kahng: Bell Telephone Laboratories [4] NMOS May 1965: 8,000 nm 150 nm: NMOS Chih-Tang Sah, Otto Leistiko, A ...
A set of metric spanners or wrenches, open at one end and box/ring at the other. These are commonly known as “combination” spanners. A wrench or spanner is a tool used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning.
A distorted thread locknut, [1] is a type of locknut that uses a deformed section of thread to keep the nut from loosening due to vibrations, or rotation of the clamped item. There are four types: elliptical offset nuts, centerlock nuts, toplock nuts and partially depitched (Philidas) nuts.