Search results
Results from the WOW.Com Content Network
Stone, 16 cubic feet (0.453 m 3) Salt, 42 US bushels (1.480 m 3) Lime, 40 US bushels (1.410 m 3) Coke, 28 US bushels (0.99 m 3) Wheat, 20 US bushels (0.705 m 3) The nearest thing to a standard cubic ton seems to be the "timber" cubic ton (40 cubic feet or 1.133 cubic metres) which is used by freight transport operators in the US. [1] [2]
As an example, given a concentration of 260 mg/m 3 at sea level, calculate the equivalent concentration at an altitude of 1,800 meters: C a = 260 × 0.9877 18 = 208 mg/m 3 at 1,800 meters altitude Standard conditions for gas volumes
A cubic metre is sometimes abbreviated to m^3, M3, m**3, cum, m3, CBM, cbm when superscript characters or markup cannot be used (e.g. in some typewritten documents and postings in Usenet newsgroups). The "cubic metre" symbol is encoded by Unicode at code point U+33A5 ㎥ SQUARE M CUBED .
Conversion of units is the conversion of the unit of measurement in which a quantity is expressed, typically through a multiplicative conversion factor that changes the unit without changing the quantity.
Oil conversion factor from m³ to bbl (or stb) is 6.28981100; Gas conversion factor from standard m³ to scf is 35.314666721; Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units.
The IEEE symbol for the cubic foot per second is ft 3 /s. [1] The following other abbreviations are also sometimes used: ft 3 /sec; cu ft/s; cfs or CFS; cusec; second-feet; The flow or discharge of rivers, i.e., the volume of water passing a location per unit of time, is commonly expressed in units of cubic feet per second or cubic metres per second.
With C v = 1.0 and 200 psia inlet pressure, the flow is 100 standard cubic feet per minute (scfm). The flow is proportional to the absolute inlet pressure, so the flow in scfm would equal the C v flow coefficient if the inlet pressure were reduced to 2 psia and the outlet were connected to a vacuum with less than 1 psi absolute pressure (1.0 ...
In shipping, the stowage factor indicates how many cubic metres of space one tonne (or cubic feet of space one long ton) of a particular type of cargo occupies in a hold of a cargo ship. [1] It is calculated as the ratio of the stowage space required under normal conditions, including the stowage losses caused by the means of transportation and ...