Search results
Results from the WOW.Com Content Network
Electronic design automation is used extensively to ensure that designers do not violate design rules; a process called design rule checking (DRC). DRC is a major step during physical verification signoff on the design, which also involves LVS ( layout versus schematic ) checks, XOR checks, ERC ( electrical rule check ), and antenna checks.
(example: if a resistor in a schematic had resistance=1000 (ohms) and the extracted netlist had the a matched resistor with resistance=997(ohms) and the tolerance was set to 2%, then this device parameter would pass as 997 is within 2% of 1000 ( 997 is 99.7% of 1000 which is within the 98% to 102% range of the acceptable +-2% tolerance error) )
A process design kit (PDK) is a set of files used within the semiconductor industry to model a fabrication process for the design tools used to design an integrated circuit. The PDK is created by the foundry defining a certain technology variation for their processes. It is then passed to their customers to use in the design process.
acquired by Cadence Design Systems in Q2 of 2010 ECAD, Inc. merged with SDA Systems in 1987 to create Cadence Forte Design Systems: acquired by Cadence Design Systems [15] in 2014 Cynthesizer; Gateway Design Automation: acquired by Cadence Design Systems in 1989 Verilog HDL; Verilog-XL; IKOS Systems: acquired by Mentor Graphics in 2002 [16]
Physical verification is a process whereby an integrated circuit layout (IC layout) design is verified via EDA software tools to ensure correct electrical and logical functionality and manufacturability. Verification involves design rule check (DRC), layout versus schematic (LVS), XOR (exclusive OR), antenna checks and electrical rule check ...
Computer Aids for VLSI Design - Appendix C: GDS II Format by Steven M. Rubin // Addison-Wesley, 1987; The GDSII Stream Format Archived 2016-06-16 at the Wayback Machine by Jim R. Buchanan, 6/11/96; GDS II Graphic Design System User's Operating Manual, First Edition 1978 // Calma Interactive Graphic Systems, November 1978. Retrieved Apr 21, 2020.
In the automated design of integrated circuits, signoff (also written as sign-off) checks is the collective name given to a series of verification steps that the design must pass before it can be taped out. This implies an iterative process involving incremental fixes across the board using one or more check types, and then retesting the design.
In December 2009, a technical subcommittee of Accellera — a standards organization in the electronic design automation (EDA) industry — voted to establish the UVM and decided to base this new standard on the Open Verification Methodology (OVM-2.1.1), [1] a verification methodology developed jointly in 2007 by Cadence Design Systems and Mentor Graphics.