Search results
Results from the WOW.Com Content Network
An ASH 31 glider with very high aspect ratio (AR=33.5) and lift-to-drag ratio (L/D=56) In aeronautics, the aspect ratio of a wing is the ratio of its span to its mean chord. It is equal to the square of the wingspan divided by the wing area. Thus, a long, narrow wing has a high aspect ratio, whereas a short, wide wing has a low aspect ratio. [1]
The natural outcome of this requirement is a wing design that is thin and wide, which has a low thickness-to-chord ratio. At lower speeds, undesirable parasitic drag is largely a function of the total surface area, which suggests using a wing with minimum chord, leading to the high aspect ratios seen on light aircraft and regional airliners ...
They tend to be used on fighter aircraft, such as the Lockheed F-104 Starfighter, and on very high-speed aircraft including the North American X-15. Moderate aspect ratio: general-purpose wing, very widely used, for example on the Douglas DC-3 transport. High aspect ratio: long and slender wing. More efficient aerodynamically, having less ...
The HDM.105 utilised the fuselage, tail unit and engines from Miles Aerovan Mk.4 G-AOJF, fitted with a Hurel designed 75 ft 4 in (23 m) span 20.5:1 aspect ratio wing of NACA laminar flow sections, supported on aerofoil section lifting struts. The wings were fitted with double-slotted flaps actuated by Miles electric actuators from the original ...
The Hurel-Dubois HD.31, HD.32, and HD.34 were a family of civil aircraft produced in France in the 1950s, based on Maurice Hurel's high-aspect ratio wing designs. Design and construction [ edit ]
Trapezoidal planform. In aeronautics, a trapezoidal wing is a straight-edged and tapered wing planform.It may have any aspect ratio and may or may not be swept. [1] [2] [3]The thin, unswept, short-span, low-aspect-ratio trapezoidal configuration offers some advantages for high-speed flight and has been used on a small number of aircraft types.
This tends to increase the lift-induced drag of the foreplane, which may be given a high aspect ratio in order to limit drag. [33] Such a canard airfoil has a greater airfoil camber than the wing. Another possibility is to decrease the aspect ratio of the canard, [34] with again more lift-induced drag and possibly a higher stall angle than the ...
For conventional fixed-wing aircraft with moderate aspect ratio and sweep, Oswald efficiency number with wing flaps retracted is typically between 0.7 and 0.85. At supersonic speeds, Oswald efficiency number decreases substantially. For example, at Mach 1.2 Oswald efficiency number is likely to be between 0.3 and 0.5. [1]