Search results
Results from the WOW.Com Content Network
A reactor vessel head for a pressurized water reactor. This structure is attached to the top of the reactor vessel body. It contains penetrations to allow the control rod driving mechanism to attach to the control rods in the fuel assembly. The coolant level measurement probe also enters the vessel through the reactor vessel head.
2: reactor cover [10] or vessel head [11] 3: Reactor pressure vessel 4: inlet and outlet nozzles 5: reactor core barrel or core shroud 6: reactor core 7: fuel rods The arrangement of hexagonal fuel assemblies compared to a Westinghouse PWR design. Note that there are 163 assemblies on this hexagonal arrangement and 193 on the Westinghouse ...
The reactor pressure vessel is manufactured from ductile steel but, as the plant is operated, neutron flux from the reactor causes this steel to become less ductile. Eventually the ductility of the steel will reach limits determined by the applicable boiler and pressure vessel standards, and the pressure vessel must be repaired or replaced ...
Primary coolant system showing reactor pressure vessel (red), steam generators (purple), pressurizer (blue), and pumps (green) in the three coolant loop Hualong One design. The Hualong One (Chinese: 华龙一号; pinyin: Huálóng yī hào; lit.
The Indian Pressurized Water Reactor-900 (IPWR-900) is a class of pressurized water reactors being designed by the Bhabha Atomic Research Centre (BARC) in partnership with the Nuclear Power Corporation of India Limited to supplement the Indian three-stage nuclear power programme.
It provides material specifications for ferrous materials which are suitable for use in the construction of pressure vessels. [ 13 ] The specifications contained in this Part specify the mechanical properties, heat treatment, heat and product chemical composition and analysis, test specimens, and methodologies of testing.
English: Generation II nuclear reactor vessel sizes of similar power output: PWR: typical Westinghouse 4 loop reactor pressure vessel (3411MWt, 1125MWe). CANDU: Darlington reactor calandria (2657MWt, 935MWe). BWR-4 reactor pressure vessel (3293MWt, 1098MWe). RBMK-1000 reactor steel vessel, biological shields, and water tank (3200MWt, 1000MWe).
Control rods are usually used in control rod assemblies (typically 20 rods for a commercial PWR assembly) and inserted into guide tubes within the fuel elements. Control rods often stand vertically within the core. In PWRs they are inserted from above, with the control rod drive mechanisms mounted on the reactor pressure vessel head. In BWRs ...