Search results
Results from the WOW.Com Content Network
Message Signaled Interrupts (MSI) are a method of signaling interrupts, using special in-band messages to replace traditional out-of-band signals on dedicated interrupt lines. While message signaled interrupts are more complex to implement in a device, they have some significant advantages over pin-based out-of-band interrupt signalling, such ...
To communicate with the main computer system, several forms of communication can be used, including ACPI, SMBus, or shared memory. The embedded controller has its own RAM, independent of that used by the main computer system, and often its own flash ROM on which the controller's software is stored. Many BIOS updates also include upgrades for ...
The standard encoding of the keyboard that offers the INT 16 h is a US keyboard. To adapt the coding of the INT 16h to another type of keyboard (for example, an international keyboard), the code must analyze the scan-code of the key pressed, and then perform suitable interpreting.
The original super I/O chips communicated with the central processing unit (CPU) via the ISA bus. [6] With the evolution away from ISA towards use of the PCI bus, the Super I/O chip was often the biggest remaining reason for continuing inclusion of ISA on the motherboard.
When data from the keyboard arrives, the controller raises an interrupt (a keyboard interrupt) to allow the CPU to handle the input. If a keyboard is a separate peripheral system unit (such as in most modern desktop computers ), the keyboard controller is not directly attached to the keys, but receives scancodes from a microcontroller embedded ...
The serial DCD pin can be used to accurately detect a PPS signal, as described in RFC 2783: [1] One convenient means to provide a PPS signal to a computer system is to connect that signal to a modem-control pin on a serial-line interface to the computer. The Data Carrier Detect (DCD) pin is frequently used for this purpose.
In this mode, the data rate is insufficient to drive a display, but is usable for sending configuration information and commands. High speed mode enables the high-speed clock (at frequencies from tens of megahertz to over one gigahertz) that acts as the bit clock for the data lanes. Clock speeds vary by the requirements of the display.
In his book The Humane Interface, Jef Raskin defines modality as follows: "An human-machine interface is modal with respect to a given gesture when (1) the current state of the interface is not the user's locus of attention and (2) the interface will execute one among several different responses to the gesture, depending on the system's current state."