Search results
Results from the WOW.Com Content Network
To conform to these regulations the gate system must be checked with a calibrated force tester and the full results kept in a technical file for 7 years. If the gate is not tested it does not comply. Most gate kits can be fitted with safety equipment so that these limits are achieved and so cover that part of EN13241-1.
Within the gate valve, there is a gatelike disk that moves up and down perpendicular to the path of flow and seats against two seat faces to shut off flow. The velocity of the fluid against a partly opened disk may cause vibration and chattering which will ultimately lead to damage to the seating surfaces. This is a common way that gate valves ...
A sliding door operator (or sliding door opener or automatic sliding door operator) is a device that operates a sliding door for pedestrian use. It opens the door automatically, waits, then closes it.
Floodgates, also called stop gates, are adjustable gates used to control water flow in flood barriers, reservoir, river, stream, or levee systems. They may be designed to set spillway crest heights in dams , to adjust flow rates in sluices and canals , or they may be designed to stop water flow entirely as part of a levee or storm surge system.
Ship caisson at Droogdok Jan Blanken at Hellevoetsluis. A caisson is a form of lock gate.It consists of a large floating iron or steel box. This can be flooded to seat the caisson in the opening of the dock to close it, or pumped dry to float it and allow it to be towed clear of the dock.
Gate valves may have flanged ends drilled according to pipeline-compatible flange dimensional standards. Gate valves are typically constructed from cast iron, cast carbon steel, ductile iron, gunmetal, stainless steel, alloy steels, and forged steels. All-metal gate valves are used in ultra-high vacuum chambers to isolate regions of the chamber ...
Pressure forces on a submerged body act perpendicular to the body's surface. The design of the Tainter gate results in every pressure force acting through the centre of the imaginary circle of which the gate is a section, so that all resulting pressure force acts through the pivot point of the gate, making construction and design easier.
Some sliding doors run on a wall-mounted rail, like this one Sliding doors in a modern wardrobe. The 'top-hung' system is most often used. The door is hung by two trolley hangers at the top of the door running in a concealed track; all the weight is taken by the hangers, making the door easier to move.