Search results
Results from the WOW.Com Content Network
The command bytes are shown here in Hex, but are sent as bytes, not hex strings. In all cases except the Return command, the high nibble indicates which port (on a multi-port TNC) the command applies to. A TNC may support other nonstandard commands, at the vendor's discretion.
Compatible with Arduino with servo ports - added features: External DC power socket (7 VDC to 20 VDC) or USB powered. On-board 5 V regulator with heatsink area for efficient 1000 mA output. Has built in ICSP port for on the fly programming (P1). Robotics ready (has 4 servo ports P3 and P2). GSTduino ATmega328 Green System Technology [69]
A sketch is a program written with the Arduino IDE. [72] Sketches are saved on the development computer as text files with the file extension .ino. Arduino Software (IDE) pre-1.0 saved sketches with the extension .pde. A minimal Arduino C/C++ program consists of only two functions: [73]
This was an early example of a medium-scale integrated circuit. Another popular chip was the SCN2651 from the Signetics 2650 family. An example of an early 1980s UART was the National Semiconductor 8250, which was used in the original IBM PC's Asynchronous Communications Adapter card. [5] In the 1990s, newer UARTs were developed with on-chip ...
A combination of an ATmega328P and an I 2 C based RGB backlit LCD interface (software compatible with the Adafruit RGB LCD shield), along with a USB serial programming interface done as a "backpack" module for the LCD. LEDuino [172] A board with enhanced I 2 C, DCC decoder and CAN-bus interfaces. Manufactured using surface mount and sold ...
Only the JTAG port uses conventional 2.54 mm pinout. All the other AVR I/O ports require more compact 1.27 mm headers. The AVR Dragon can both program and debug since the 32 KB limitation was removed in AVR Studio 4.18, and the JTAGICE mkII is capable of both programming and debugging the processor.
SparkFun ESP8266 Thing. The reason for the popularity of many of these boards over the earlier ESP-xx modules is the inclusion of an on-board USB-to-UART bridge (like the Silicon Labs' CP2102 or the WCH CH340G) and a Micro-USB connector, coupled with a 3.3-volt regulator to provide both power to the board and connectivity to the host (software development) computer – commonly referred to as ...
Gluon – Framework for building OpenWrt-based firmwares fitted for mesh network deployment: GitHub Project; JUCIWRT – a modern distribution using the JUCI webgui that later became an OpenWrt feed instead. The source code for JUCI is available at mkschreder/juci and is still usable by installing openwrt feed found at mkschreder/juci-openwrt-feed