Search results
Results from the WOW.Com Content Network
DockPort (originally codenamed Lightning Bolt [1]) is a backward-compatible extension of DisplayPort, adding USB 3.0 and DC power, in addition to DisplayPort's video and audio signalling. Standardised by VESA, it is the first royalty-free industry standard to combine these four interface functions in one connector.
Analog camcorders commonly use a 3.5 mm four-contact TRRS connector to carry composite video and stereo audio. Jack appears identical to more common three-contact stereo audio-only 3.5 mm TRS connector. DisplayPort: DisplayPort (DP) was designed to replace VGA, DVI, and FPD-Link and standardized by VESA. [2]
A VGA connector. Video connectors carry only video signals. Common video-only connectors include: Component video aka YPbPr (3 RCA or BNC; or D-Terminal) Composite video (1 RCA, Antenna socket, or BNC) DB13W3 ("13W3" computer video connector) DMS-59, single connector carrying two DVI and two VGA
Such cards, when equipped with only a VGA connector adapter cable, cannot be connected to a monitor with only a DVI-D input. A DMS-59 to DVI adapter cable needs to be used with such monitors. The DMS-59 connector is derived from the LFH-60 Molex low-force helix connector, which could be found in some earlier graphics cards. These ports are ...
Apple Lightning to USB-A cable. Lightning is an 8-pin digital connector. Unlike the 30-pin dock connector it replaced (and USB Type-A and -B connectors), it is reversible. [23] Most Lightning devices only support USB 2.0, which has a maximum transfer speed of 480 Mbit/s or 60 MB/s. With USB 2.0, only one lane is in use at a time.
DisplayPort connector A DisplayPort port (top right) on a laptop from 2010, near an Ethernet port (center) and a USB port (bottom right). DisplayPort (DP) is a proprietary [a] digital display interface developed by a consortium of PC and chip manufacturers and standardized by the Video Electronics Standards Association (VESA).
Display Data Channel (DDC) is a collection of protocols for digital communication between a computer display and a graphics adapter that enable the display to communicate its supported display modes to the adapter and that enable the computer host to adjust monitor parameters, such as brightness and contrast.
DisplayPort displays use one TMDS/DisplayPort transmitter and no clock signal. An active DisplayPort adapter can convert a DisplayPort signal to another type of signal—like VGA, single-link DVI, or dual-link DVI; or HDMI if more than two non-DisplayPort displays must be connected to a Radeon HD 5000 series graphics card. [7]