Search results
Results from the WOW.Com Content Network
Principle of the gas diffusion electrode. The principle of gas diffusion is illustrated in this diagram. The so-called gas distribution layer is located in the middle of the electrode. With only a small gas pressure, the electrolyte is displaced from this pore system. A small flow resistance ensures that the gas can freely flow inside the ...
PEMFCs are built out of membrane electrode assemblies (MEA) which include the electrodes, electrolyte, catalyst, and gas diffusion layers. An ink of catalyst, carbon, and electrode are sprayed or painted onto the solid electrolyte and carbon paper is hot pressed on either side to protect the inside of the cell and also act as electrodes.
The oxidizing gas (e.g., pure O 2, O 2 in air, CO 2, etc.) percolates through a hydrophobic layer on the gas diffusion electrode, acting as a cathode. After the gas diffuses to the electrically conducting layer acting as an electrocatalyst (e.g., hydrophilic activated carbon), the gas is electrochemically reduced.
Methanol cross-over and/or its effects can be alleviated by (a) developing alternative membranes (e.g. [6] [7]), (b) improving the electro-oxidation process in the catalyst layer and improving the structure of the catalyst and gas diffusion layers (e.g. [8]), and (c) optimizing the design of the flow field and the membrane electrode assembly ...
The two electrodes are separated by a porous matrix saturated with an aqueous alkaline solution, such as potassium hydroxide (KOH). Aqueous alkaline solutions do not reject carbon dioxide (CO 2) so the fuel cell can become "poisoned" through the conversion of KOH to potassium carbonate (K 2 CO 3). [2]
The planar fuel cell design geometry is the typical sandwich type geometry employed by most types of fuel cells, where the electrolyte is sandwiched in between the electrodes. SOFCs can also be made in tubular geometries where either air or fuel is passed through the inside of the tube and the other gas is passed along the outside of the tube.
This configuration allows for efficient proton conduction and effective gas diffusion, making it suitable for various applications, including fuel cell vehicles and portable power systems. Research has shown that 5-layer MEAs can provide improved performance under different operating conditions, making them a preferred choice in the industry.
Diagram of the mercury-cell process, showing an "inner" cell sandwiched between two "outer" cells, with a layer of mercury common to all three. In the mercury-cell process, also known as the Castner–Kellner process , the "outer" electrolytic cells each contain an anode immersed in brine, which floats on a layer of mercury.