Ad
related to: secondary treatment for sewage loss prevention practices- Chemical Tank Lining
100% Solids Instant Cure Lining
For Acid & Alkaline Liquid Storage.
- Steel Water Tank Lining
Monolithic Instant Cure Lining
For Bolted & Welded Steel Tanks.
- Concrete Tank Sealing
For Wastewater, Potable Water and
Fire Suppression Concrete Tanks.
- Fiberglass Tank Lining
In-place Upgrade of FRP Tank Lining
Compatible with Corrosive Liquids.
- Chemical Tank Lining
Search results
Results from the WOW.Com Content Network
Secondary treatment (mostly biological wastewater treatment) is the removal of biodegradable organic matter (in solution or suspension) from sewage or similar kinds of wastewater. [ 1 ] : 11 The aim is to achieve a certain degree of effluent quality in a sewage treatment plant suitable for the intended disposal or reuse option.
Activated sludge tank at Beckton sewage treatment plant, UK.The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa.
Secondary sludge is sludge separated in secondary clarifiers that are used in secondary treatment bioreactors or processes using inorganic oxidizing agents. In intensive sewage treatment processes, the sludge produced needs to be removed from the liquid line on a continuous basis because the volumes of the tanks in the liquid line have ...
The basic national standard for U.S. municipal treatment plants is the Secondary Treatment Regulation. [2] Most plants in the U.S. must meet this secondary treatment standard. The permit authority (state agency or EPA) can compel a POTW to meet a higher standard, if there are applicable water quality standards for the receiving water body.
At the POTW, harmful pollutants in domestic sewage, called conventional pollutants, are removed from the sewage and then the treated effluent is discharged into a surface water body. [38] The removed solids constitute sewage sludge, which typically receive further treatment prior to final disposal on land. (See Sewage sludge treatment.) POTWs ...
Sewage sludge is the residual, semi-solid material that is produced as a by-product during sewage treatment of industrial or municipal wastewater. The term " septage " also refers to sludge from simple wastewater treatment but is connected to simple on-site sanitation systems, such as septic tanks .
Extended aeration agitates all incoming waste in the sludge from a single clarifier. The combined sludge starts with a higher concentration of inert solids than typical secondary sludge and the longer mixing time required for digestion of primary solids in addition to dissolved organics produces aged sludge requiring greater mixing energy input per unit of waste oxidized.
The RBC process allows the wastewater to come in contact with a biological film in order to remove pollutants in the wastewater before discharge of the treated wastewater to the environment, usually a body of water (river, lake or ocean). A rotating biological contactor is a type of secondary (biological) treatment process.
Ad
related to: secondary treatment for sewage loss prevention practices