Search results
Results from the WOW.Com Content Network
A mechanically driven supercharger offers exceptional response and low-rpm performance, as it does not rely on pressurization of the exhaust manifold (assuming that it is a positive-displacement design, such as a Roots-type or twin-screw, as opposed to a centrifugal supercharger, which does not provide substantial boost in the lower rpm range), but is less efficient than a turbocharger due to ...
The first, called Combined Combustion System or CCS, is based on the VW Group 2.0-litre diesel engine, but uses homogeneous intake charge. It requires synthetic fuel to achieve maximum benefit. The second is called Gasoline Compression Ignition or GCI; it uses HCCI when cruising and spark ignition when accelerating.
Honda's CVCC engine, released in the early 1970s models of Civic, then Accord and City later in the decade, is a form of stratified charge engine that had wide market acceptance for considerable time. The CVCC system had conventional inlet and exhaust valves and a third, supplementary, inlet valve that charged an area around the spark plug.
A "twingle" is a four-stroke twin-cylinder engine with an altered firing order designed to give power pulses similar to a single-cylinder four-stroke engine. Inline twins with a 360° crankpin offset or flat-twins can be easily converted into twingles by firing both of the cylinders at the same time and installing a camshaft or camshafts that ...
The Volvo Engine Architecture [13] (VEA) is a family of straight-three and straight-four automobile petrol and diesel engines produced by Volvo Cars in Skövde, [30] Sweden, since 2013, [31] Zhangjiakou, [32] China, since 2016 [33] and Tanjung Malim, Malaysia, since 2022 by Proton. [34]
A type of stratified charge technology, it was publicized on October 11, 1972 and licensed to Toyota (as TTC-V), Ford, Chrysler, and Isuzu before making its production debut in the 1975 ED1 engine. As emission laws advanced and required more stringent admissible levels, CVCC was abandoned in favour of PGM-FI (Programmed Fuel Injection) on all ...
Average fuel consumption is about 950 lb. per hour for a 7,765 lbf engine on a G280, to be compared to 875 lb. per hour for a 4,420 lbf TFE731 on a G150. [3] More than 3.5 million flight hours have been logged till October 2017, and the 2,000th engine should be delivered in 2018. [2] Honeywell maintenance program is $447 for two engines per ...
Developed by GE Aircraft Engines during the late 1960s, the original engine comprises a single stage fan, driven by a 4-stage low pressure (LP) turbine, supercharging a 14-stage high pressure (HP) compressor, driven by a 2-stage HP turbine. An annular combustor is featured.