enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Framing (construction) - Wikipedia

   en.wikipedia.org/wiki/Framing_(construction)

   Studs usually consist of 1 + 1 ⁄ 2-by-3 + 1 ⁄ 2-inch (38 mm × 89 mm) or 1 + 1 ⁄ 2-by-5 + 1 ⁄ 2-inch (38 mm × 140 mm) lumber and are commonly spaced at 16 inches (410 mm) on center. This spacing may be changed to 12 or 24 inches (300 or 610 mm) on center depending on the load and the limitations imposed by the type and thickness of the ...

3. Wood warping - Wikipedia

   en.wikipedia.org/wiki/Wood_warping

   Wood slabs can also become warped as a result of insufficient support from underlying shelf hardware (commonly referred to as sagging or bowing). [2] The types of wood warping include: bow: a warp along the length of the face of the wood; crook: a warp along the length of the edge of the wood; kink: a localized crook, often due to a knot

4. Sink - Wikipedia

   en.wikipedia.org/wiki/Sink

   There are generally two kinds of butler's sinks: the London sink and the Belfast sink. [5] In 2006, both types of sinks usually were 61 centimetres (24 in) across and 46 centimetres (18 in) front-to-back, with a depth of 22.5 centimetres (8.9 in). [6] London sinks were originally shallower than Belfast sinks. [5]

5. Kitchen work triangle - Wikipedia

   en.wikipedia.org/wiki/Kitchen_Work_Triangle

   A sink should have a clear counter area of at least 60 cm (24 in) on one side, and at least 45 cm (18 in) on the other side. A refrigerator should have a clear counter area of at least 40 cm (15 in) on the handle side; or the same on either side of a side-by-side refrigerator; or the same area on a counter no more than 120 cm (48 in) across ...

6. Sheet metal - Wikipedia

   en.wikipedia.org/wiki/Sheet_metal

   The older United States Standard Gauge is based upon 40 lb per square foot per inch thick. Gauge is defined differently for ferrous (iron-based) and non-ferrous metals (e.g. aluminium and brass). The gauge thicknesses shown in column 2 (U.S. standard sheet and plate iron and steel decimal inch (mm)) seem somewhat arbitrary.

7. List of cooking vessels - Wikipedia

   en.wikipedia.org/wiki/List_of_cooking_vessels

   The company derived its name from this cladding process, which is applied not only on the bottom but extends all the way up the sides of each cooking vessel. The company has been issued several patents by the United States Patent and Trademark Office (USPTO). [46] Chue Chin Hua – an aluminium cookware and metal producing company in Thailand