enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Pressure regulator - Wikipedia

   en.wikipedia.org/wiki/Pressure_regulator

   Propane regulators differ in size and shape, delivery pressure and adjustability, but are uniform in their purpose to deliver a constant outlet pressure for downstream requirements. Common international settings for domestic LP gas regulators are 28 mbar for butane and 37 mbar for propane.

3. Gas cylinder - Wikipedia

   en.wikipedia.org/wiki/Gas_cylinder

   For gases that are liquid under storage, e.g., propane, the outlet pressure is dependent on the vapor pressure of the gas, and does not fall until the cylinder is nearly exhausted, although it will vary according to the temperature of the cylinder contents. The regulator is adjusted to control the downstream pressure, which will limit the ...

4. Propane, butane, and LPG container valve connections

   en.wikipedia.org/wiki/Propane,_butane,_and_LPG...

   1 lb (16 oz) propane bottle (Coleman) 1"-20 CGA600 UNEF 25.4 mm 1.27 mm 1" 20 tpi EXT RH ABNT NBR 13794 ABNT NBR 8614 NPT: 19.1 mm 1.814 mm 3/4" 14 TPI ABNT NBR 8614 a ABNT NBR 8614 NPT: 9.5 mm 3/8" No thread ABNT NBR 8614 b ABNT NBR 8614 NPT: 19.1 mm 1.814 mm 3/4" 14 TPI Bayonet Autogas Bayonet No thread Bayonet camping: N/A No thread EXT N/A

5. POL valve - Wikipedia

   en.wikipedia.org/wiki/POL_valve

   POL is the common name for the standard CGA 510 (US Compressed Gas Association connection number). The Thread specification is .885" – 14 NGO – LH – INT, meaning 0.885 in (22.5 mm) diameter thread, 14 threads per inch (1.814 mm pitch), National Gas Outlet form, left-hand internal thread. [3]

6. Propane - Wikipedia

   en.wikipedia.org/wiki/Propane

   HD-5 is a specification that establishes a maximum concentration of 5% propene in propane. Propane and other LP gas specifications are established in ASTM D-1835. [46] All propane fuels include an odorant, almost always ethanethiol, so that the gas can be smelled easily in case of a leak. Propane as HD-5 was originally intended for use as ...

7. Oxy-fuel welding and cutting - Wikipedia

   en.wikipedia.org/wiki/Oxy-fuel_welding_and_cutting

   A single-stage regulator will tend to allow a reduction in outlet pressure as the cylinder is emptied, requiring manual readjustment. For low-volume users, this is an acceptable simplification. Welding regulators, unlike simpler LPG heating regulators, retain their outlet (hose) pressure gauge and do not rely on the calibration of the ...