Search results
Results from the WOW.Com Content Network
In practice, creep during drying is inseparable from shrinkage. The rate of creep increases with the rate of change of pore humidity (i.e., relative vapor pressure in the pores). For small specimen thickness, the creep during drying greatly exceeds the sum of the drying shrinkage at no load and the creep of a loaded sealed specimen (Fig. 1 bottom).
Most metals and alloys shrink as the material changes from a liquid state to a solid state. Therefore, if liquid material is not available to compensate for this shrinkage a shrinkage defect forms. [3] When progressive solidification dominates over directional solidification a shrinkage defect will form. [2]
Yet another solution is a process called soil stabilization, in which additional materials are added to the soil to limit its ability to shrink and swell. [7] Materials for stabilization include cement , resins , fly ash , lime , pozzolana , or lime-pozzolana mixture, [ 7 ] depending on the site conditions and the project goals.
Surface modification is the act of modifying the surface of a material by bringing physical, chemical or biological characteristics different from the ones originally found on the surface of a material. [1] This modification is usually made to solid materials, but it is possible to find examples of the modification to the surface of specific ...
Elastic properties describe the reversible deformation (elastic response) of a material to an applied stress. They are a subset of the material properties that provide a quantitative description of the characteristics of a material, like its strength. Material properties are most often characterized by a set of numerical parameters called moduli.
A bronze casting showing the sprue and risers. A riser, also known as a feeder, [1] is a reservoir built into a metal casting mold to prevent cavities due to shrinkage.Most metals are less dense as a liquid than as a solid so castings shrink upon cooling, which can leave a void at the last point to solidify.
The material is often cross-linked through the use of electron beams, [6] peroxides, or moisture. This cross-linking creates the memory in the tubing so that it is able to shrink back to its original extruded dimensions upon heating, producing a material called heat-shrink tubing. For outdoor use, heat-shrink tubing often has a UV stabiliser added.
Shrinkage (accounting), loss of product inventory due to theft, damage, spoilage, etc. Shrinkage defect or shrinkage void, a casting defect caused by metal solidifying from the outside inward; Shrinkage (statistics), a technique to improve an estimator; Shrinkage (slang)