Search results
Results from the WOW.Com Content Network
The engine has a bore and stroke of 84 mm × 90 mm (3.31 in × 3.54 in) with a compression ratio of 16.0:1, and generates 250 hp (186 kW) at 3,250 rpm and 440 lb⋅ft (597 N⋅m) of torque at 1,750 rpm, paired with a Ford–GM 10-speed automatic transmission. It provided a towing capacity of up to 11,440 lb (5,189 kg) when properly equipped.
2012–present; The 3.2 is an I5 engine used in the Ford Transit, the Ford Ranger, Ford Everest, Mazda BT-50 and the Vivarail. For the North American-spec Transit, * the 3.2 L Duratorq is modified to meet American and Canadian emissions standards and is branded as a Power Stroke engine.
The smallest-displacement engine of the 385 engine family, the 370 was introduced after the 429 and 460, replacing the 361 cu in (5.9 L) 360 Truck (FT) V8 in 1977. . Sharing its 3.59-inch stroke with the 429, the 370 was designed with a downsized 4.05-inch bore (shared with its predecessor and the 3
In 1948, Ford raised the compression of the flathead six or L-6 (designated H-series or Rouge 226) so that it generated 95 hp (71 kW) and 180 lb⋅ft (244 N⋅m) of torque. The G- and H-series engines were used in the full-sized Ford cars and trucks to replace the smaller 136 cu in (2.2 L) Flathead V8 that was used in the 1937 Ford .
During the 1990s, the Ford V8 that was used in these trucks was decommissioned and removed for more economical Renault engines to be retrofitted. Thus the Ford V8 engines were sold off and thus provided a new source of little-worn engines for the hotrodding community. The block metallurgy, being much later, was also stronger than the originals ...
A 427 Cammer once used by Ford's "X-Garage" skunkworks Ford's 427 cu in/7.0 L Cammer SOHC hemi-head V8 showing cam, rockers and timing chains The Ford single overhead cam (SOHC) 427 V8 engine, familiarly known as the "Cammer", [ 25 ] was released in 1964 in an effort to maintain NASCAR dominance by seeking to counter the enormously large block ...
The Ford Pinto engine was the unofficial name for a four-cylinder internal combustion engine built by Ford Europe. In Ford sales literature, it was referred to as the EAO or OHC engine and because it was designed to the metric system, it was sometimes called the "metric engine". The internal Ford codename for the unit was the T88-series engine.
The Sterling 10.5 axle is an automotive axle manufactured by Ford Motor Company at the Sterling Axle Plant in Sterling Heights, MI. It was first used in model year 1985 Ford trucks. The axle was developed to replace the Dana 60 and Dana 70. The Sterling 10.5 axle is currently only made as a full floating axle.