Search results
Results from the WOW.Com Content Network
Typical gear ratios on bicycles range from very low or light gearing around 20 gear inches (1.6 metres per revolution), via medium gearing around 70 gear inches (5.6 m), to very high or heavy gearing around 125 gear inches (10 m). As in a car, low gearing is for going up hills and high gearing is for going fast.
For a pair of meshing gears, the angular speed ratio, also known as the gear ratio, can be computed from the ratio of the pitch radii or the ratio of the number of teeth on each gear. Define the angular speed ratio R AB of two meshed gears A and B as the ratio of the magnitude of their respective angular velocities:
The speed ratio for a pair of meshing gears can be computed from ratio of the radii of the pitch circles and the ratio of the number of teeth on each gear, its gear ratio. Two meshing gears transmit rotational motion. The velocity v of the point of contact on the pitch circles is the same on both gears, and is given by
Worm-and-gear sets are a simple and compact way to achieve a high torque, low speed gear ratio. For example, helical gears are normally limited to gear ratios of less than 10:1 while worm-and-gear sets vary from 10:1 to 500:1. [45] A disadvantage is the potential for considerable sliding action, leading to low efficiency. [46]
Crawl ratio is a term used in the automotive world to describe the highest gear ratio that a vehicle is capable of. Note that gear ratio, also known as speed ratio, of a gear train is defined as the ratio of the angular velocity of the input gear to the angular velocity of the output gear, and thus a higher gear ratio implies a larger speed reduction, i.e. the input speed is reduced more at ...
The left sun gear (red) provides more resistance than the right sun gear (yellow), which causes the planet gear (green) to rotate anti-clockwise. This produces slower rotation in the left sun gear and faster rotation in the right sun gear, resulting in the car's right wheel turning faster (and thus travelling farther) than the left wheel.
A wear volume versus distance curve can be divided into at least two regimes, the transient wear regime and the steady-state wear regime. The volume or weight loss is initially curvilinear. The wear rate per unit sliding distance in the transient wear regime decreases until it has reached a constant value in the steady-state wear regime.
The rotational speed of the wheels for that given forward speed is simple to calculate, being the tire circumference multiplied by the RPM. [a] As the tire RPM at maximum speed is not the same as the engine RPM at that power, a transmission is used with a gear ratio to convert one to the other. [b]