Search results
Results from the WOW.Com Content Network
The boat is normally fitted with a small outboard motor of 7.5 to 15 hp (6 to 11 kW) for docking and maneuvering, although a Yanmar inboard diesel engine of 9 hp (7 kW) was a factory option. The fresh water tank has a capacity of 40 U.S. gallons (150 L; 33 imp gal).
The boat displaces 4,800 lb (2,177 kg) and carries 1,900 lb (862 kg) of ballast. [1] [2] The boat has a draft of 2.50 ft (0.76 m) with the standard keel fitted. [1] [2] The boat is normally fitted with a small 6 to 12 hp (4 to 9 kW) outboard motor for docking and maneuvering, although an inboard diesel engine of 12 hp (9 kW), was optional. [2]
The Schock 25 is a recreational keelboat, built predominantly of fiberglass, with wood trim.It has a fractional sloop; a raked stem; a raised counter, angled transom, a keel-hung rudder controlled by a tiller and a fixed fin keel.
Starting in 1980, a number of boats were built with a masthead sloop rig and known as the MacGregor 25 MH. [ 1 ] The boat has a draft of 5.67 ft (1.73 m) with the centreboard extended and 1.50 ft (0.46 m) with it retracted, allowing beaching or ground transportation on a trailer .
The boat is normally fitted with a small 4 to 8 hp (3 to 6 kW) outboard motor for docking and maneuvering. [ 1 ] [ 6 ] The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, a drop-down dinette table that forms a double berth in the main cabin to port and an aft quarter berth on the starboard side.
The boat has a draft of 4.00 ft (1.22 m) with the standard keel. The fresh water tank has a capacity of 5 U.S. gallons (19 L; 4.2 imp gal). [1] [3] The boat is normally fitted with a small 4 to 6 hp (3 to 4 kW) outboard motor for docking and maneuvering. [4]
The boat has a draft of 4.25 ft (1.30 m) with the standard keel and 3.00 ft (0.91 m) with the optional shoal draft keel. [ 1 ] [ 3 ] [ 5 ] The boat is normally fitted with a small 6 to 10 hp (4 to 7 kW) outboard motor for docking and maneuvering.
C&C 25 Mk II or 25-2 This model was a complete redesign of the earlier C&C 25 by Robert W. Ball and introduced in 1980. A smaller and lighter boat than its predecessor, it has a length overall of 25.08 ft (7.6 m), a waterline length of 20.00 ft (6.1 m), displaces 4,150 lb (1,882 kg) and carries 1,880 lb (853 kg) of lead ballast.