Search results
Results from the WOW.Com Content Network
For bicycles with 700c wheels, some cyclists quote gear inches based on a nominal wheel diameter of 27 inches, corresponding to the old British tire size of 27 x 1 + 1 ⁄ 4" (ETRTO 630). Strictly speaking, the rolling diameter of a 700c wheel may be significantly higher or lower than 27", depending on the tire size, e.g. nearly 27.5" for a ...
One standard option for the Brompton folding bicycle is to use a 3-speed hub gear (roughly a 30% difference between gear ratios) in combination with a 2-speed derailleur gear (roughly a 15% difference) to give 6 distinct gear ratios; this is an example of half-step gearing. Some Brompton suppliers offer a 2-speed chainring 'Mountain Drive' as ...
Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.
The gear range is difference between the highest and lowest gear ratios and may be expressed as a percentage (e.g., 500%) or as a ratio (e.g., 5:1). Heel [ edit ]
A hub gear, [1] internal-gear hub, [2] internally geared hub [3] or just gear hub [4] is a gear ratio changing system commonly used on bicycles that is implemented with planetary or epicyclic gears. The gears and lubricants are sealed within the shell of the hub gear, in contrast with derailleur gears where the gears and mechanism are exposed ...
Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.
The formula specifies that a cyclekart is a one-seat car using Honda 17 × 1.75 or 2 inch (432 × 44 or 51 mm) rims, 17 × 2.50 (432 × 64 mm) tires, a 38-inch (965 mm) track, wheelbase as close to 66 inches (1676 mm) as the aesthetics of the car will allow, weight no more than 250 lbs (113 kg), and powered by a 200 cc class, single cylinder, 6 ...
In most vehicles with a manual transmission, the driver selects gears by manipulating a lever called a gear stick (also called a gearshift, gear lever or shifter). In most automobiles, the gear stick is located on the floor between the driver and front passenger, but some cars have a gear stick that is mounted to the steering column or center ...