Search results
Results from the WOW.Com Content Network
Calibrated airspeed in knots is usually abbreviated as KCAS, while indicated airspeed is abbreviated as KIAS. In some applications, notably British usage, the expression rectified airspeed is used instead of calibrated airspeed. [1]
In aviation, equivalent airspeed (EAS) is calibrated airspeed (CAS) corrected for the compressibility of air at a non-trivial Mach number. It is also the airspeed at sea level in the International Standard Atmosphere at which the dynamic pressure is the same as the dynamic pressure at the true airspeed (TAS) and altitude at which the aircraft ...
An aircraft's indicated airspeed in knots is typically abbreviated KIAS for "Knots-Indicated Air Speed" (vs. KCAS for calibrated airspeed and KTAS for true airspeed). The IAS is an important value for the pilot because it is the indicated speeds which are specified in the aircraft flight manual for such important performance values as the stall ...
Airspeed is commonly given in knots (kn). Since 2010, the International Civil Aviation Organization (ICAO) recommends using kilometers per hour (km/h) for airspeed (and meters per second for wind speed on runways), but allows using the de facto standard of knots, and has no set date on when to stop.
The indicated airspeed is close to the true airspeed only at sea level in standard conditions and at low speeds. At 11 000 m ( 36 000 ft), an indicated airspeed of 300 kn may correspond to a true airspeed of 500 kn in standard conditions.
Though air data includes altitude, airspeed, pressures, air temperature, Mach number, and flow angles (e.g., Angle of Attack and Angle of sideslip), existing known SADS primarily focuses on estimating airspeed, Angle of Attack, and Angle of sideslip. SADS is used to monitor the primary air data system if there is an anomaly due to sensor faults ...
Maximum structural cruising speed or maximum speed for normal operations. Speed at which exceeding the limit load factor may cause permanent deformation of the aircraft structure. [7] [8] [9] [24] V O: Maximum operating maneuvering speed. [25] V R: Rotation speed. The speed at which the pilot begins to apply control inputs to cause the aircraft ...
V A is the design maneuvering speed and is a calibrated airspeed.Maneuvering speed cannot be slower than and need not be greater than V c. [4]If is chosen by the manufacturer to be exactly the aircraft will stall in a nose-up pitching maneuver before the structure is subjected to its limiting aerodynamic load.