Search results
Results from the WOW.Com Content Network
The Pelton wheel or Pelton Turbine is an impulse-type water turbine invented by American inventor Lester Allan Pelton in the 1870s. [1] [2] The Pelton wheel extracts energy from the impulse of moving water, as opposed to water's dead weight like the traditional overshot water wheel.
There were two prime results of Pelton's design: it consolidated the introduction of a new physical science into the ancient human quest to develop hydropower, i.e., the science of the impulse turbine as opposed to the reaction turbine; and it revolutionized the use of turbines adapted for high head (i.e., elevation energy) sites.
Turgo turbine and generator At Milford Sound, New Zealand. The Turgo turbine is an impulse water turbine designed for medium head applications. Operational Turgo turbines achieve efficiencies of about 87%. In factory and lab tests Turgo turbines perform with efficiencies of up to 90%. It works with net heads between 15 and 300 m. [1]
At the rated power of 423 MW each turbine operates at a head of ~1869 meters (6130 feet) and a flow rate of 25 cubic meters per second, with an efficiency in excess of 92% (~92.23%). The turbine assembly is a five-jet configuration; the stream of each jet is 184.7 mm (7.2716535 inches) in diameter with an exit velocity of 191.5 meters/second ...
The Gorlov helical turbine (GHT) is a water turbine evolved from the Darrieus turbine design by altering it to have helical blades/foils. Water turbines take kinetic energy and translate it into electricity. It was patented in a series of patents from September 19, 1995 [1] to July 3, 2001 [2] and won 2001 ASME Thomas A. Edison.
The Francis turbine is a type of water turbine. It is an inward-flow reaction turbine that combines radial and axial flow concepts. Francis turbines are the most common water turbine in use today, and can achieve over 95% efficiency. [1] The process of arriving at the modern Francis runner design took from 1848 to approximately 1920. [1]
This turbine had a wingspan of 3.0 m, a 1:4 prototype of a turbine with 12 m wingspan and 1 m rotor diameter. [ 4 ] [ 7 ] The kite was anchored to the seabed by a 27 m long tether, and flew in a loop approximately 20 m across the flow direction and 3 m high, with the highest point approximately 7 m below the surface.
Today, the company founded by Ossberger which bears his name is the leading manufacturer of this type of turbine. Unlike most water turbines, which have axial or radial flows, in a cross-flow turbine the water passes through the turbine transversely, or across the turbine blades. As with a water wheel, the water is admitted at the turbine's ...