Search results
Results from the WOW.Com Content Network
Current limiting reactor. The main motive of using current limiting reactors is to reduce short-circuit currents so that circuit breakers with lower short circuit breaking capacity can be used. They can also be used to protect other system components from high current levels and to limit the inrush current when starting a large motor. [5]
It consists of a power capacitor connected in series with a bidirectional thyristor valve and, usually, a current limiting reactor . The thyristor switched capacitor is an important component of a Static VAR Compensator (SVC), [ 1 ] [ 2 ] where it is often used in conjunction with a thyristor controlled reactor (TCR).
Current limiting is the practice of imposing a limit on the current that may be delivered to a load to protect the circuit generating or transmitting the current from harmful effects due to a short-circuit or overload. The term "current limiting" is also used to define a type of overcurrent protective device.
Series reactors are used as current limiting reactors to increase the impedance of a system. They are also used for neutral earthing. Such reactors are also used to limit the starting currents of synchronous electric motors and to compensate reactive power in order to improve the transmission capacity of power lines. [3]
The current in the TCR is varied from maximum (determined by the connection voltage and the inductance of the reactor) to almost zero by varying the "Firing Delay Angle", α. α is defined as the delay angle from the point at which the voltage becomes positive to the point at which the thyristor valve is turned on and current starts to flow.
Thus, this reactor design is self-regulating, meltdown is impossible, and the design is inherently safe. From a safety point of view, the design leverages the technology used in the TRIGA reactor, which uses uranium zirconium hydride (UZrH) fuel and is the only reactor licensed by the U.S. Nuclear Regulatory Commission for unattended operation.
A typical application of inrush current limiters is in the input stage of non-power factor corrected switching supplies, to reduce the initial surge of current from the line input to the reservoir capacitor. The most popular application is the inrush protection of the AC current in switching power supplies (SPS).
- A pressurised heavy water reactor is a nuclear power reactor that uses unenriched natural uranium as nuclear fuel and heavy water as moderator and as primary coolant. The heavy water is kept under pressure in order to raise its boiling point, allowing it to be heated to higher temperatures and thereby carry more heat out of the reactor core.