Search results
Results from the WOW.Com Content Network
The ColorChecker Classic chart is a rectangular card measuring about 11 by 8.25 inches (27.9 by 21.0 cm), or in its original incarnation about 13 by 9 inches (33 by 23 cm), an aspect ratio approximately the same as that of 35 mm film. [5]
Ruler. An instrument used to measure distances or to draw straight lines. A variety of rulers. A 2 m (6 ft 63⁄4 in) carpenter's rule. Retractable flexible rule or tape measure. A closeup of a steel ruler. A ruler in combination with a letter scale. A ruler, sometimes called a rule, scale or a line gauge or meter stick, is an instrument used ...
Scale ruler. A scale ruler is a tool for measuring lengths and transferring measurements at a fixed ratio of length; two common examples are an architect's scale and engineer's scale. In scientific and engineering terminology, a device to measure linear distance and create proportional linear measurements is called a scale.
A ruler with two linear scales: the metric and imperial.It includes shorter minor graduations and longer major graduations. A graduation is a marking used to indicate points on a visual scale, which can be present on a container, a measuring device, or the axes of a line plot, usually one of many along a line or curve, each in the form of short line segments perpendicular to the line or curve.
The image sensor format of a digital camera determines the angle of view of a particular lens when used with a particular sensor. Because the image sensors in many digital cameras are smaller than the 24 mm × 36 mm image area of full-frame 35 mm cameras, a lens of a given focal length gives a narrower field of view in such cameras.
Keuffel and Esser 7" slide rule (5" scale, 1954) [1] A slide rule scale is a line with graduated markings inscribed along the length of a slide rule used for mathematical calculations. The earliest such device had a single logarithmic scale for performing multiplication and division, but soon an improved technique was developed which involved ...
So a 1 / 2 in (12.7 mm) diameter drill will be able to drill a hole 4 + 1 / 2 in (114.3 mm) deep, since it is 9 times the diameter in length. A 1 / 8 in (3.175 mm) diameter drill can drill a hole 1 + 5 / 8 in (41.275 mm) deep, since it is 13 times the diameter in flute length. [3]
4.2333 mm. The pica is a typographic unit of measure corresponding to approximately 1⁄6 of an inch, or from 1⁄68 to 1⁄73 of a foot. One pica is further divided into 12 points. In printing, three pica measures are used: The French pica of 12 Didot points (also called cicero) generally is: 12 × 0.376 = 4.512 mm (0.1776 in).