Search results
Results from the WOW.Com Content Network
Focal-plane shutters may also produce image distortion of very fast-moving objects or when panned rapidly, as described in the Rolling shutter article. A large relative difference between a slow wipe speed and a narrow curtain slit results in distortion because one side of the frame is exposed at a noticeably later instant than the other and the object's interim movement is imaged.
For example, for handheld use of a 35 mm camera with a 50 mm normal lens, the closest shutter speed is 1 ⁄ 60 s (closest to "50"), while for a 200 mm lens it is recommended not to choose shutter speeds below 1 ⁄ 200 s. This rule can be augmented with knowledge of the intended application for the photograph, an image intended for significant ...
bridge camera: Lens; Lens: Fixed Fujinon 30x optical zoom lens, manually actuated (no motor delay), f=4.2–126.0 mm, equivalent to 24–720 mm on a 35 mm camera: F-numbers: f /2.8–11 (wide) f /5.6–11 (long) Sensor/medium; Sensor type: BSI-CMOS – IR sensitive so there is a possibility to take infrared pictures (additional filter necessary ...
Video cameras do not have this problem, as any malfunction to the sensor will render the entire system useless. The Arri D-20 and D-21 system, however, does have removable lenses and a rotating optical shutter, which means that the CMOS sensor can be exposed in much the same way as a film gate and thus needs to be kept assiduously clean.
Zoom lenses (i.e. lenses of variable focal length) involve additional compromises and therefore normally do not match the performance of prime lenses. When a camera lens is focused to project an object some distance away onto the film or detector, the objects that are closer in distance, relative to the distant object, are also approximately in ...
Other lenses for the Contax included the Biotar, Biogon, Orthometar, and various Tessars and Triotars. The last important Zeiss innovation before the Second World War was the technique of applying anti-reflective coating to lens surfaces invented by Olexander Smakula in 1935. [8] A lens so treated was marked with a red "T", short for "Transparent".
Diagram illustrating the flange focal length of an SLR–type and a mirrorless–type camera. For an interchangeable lens camera, the flange focal distance (FFD) (also known as the flange-to-film distance, flange focal depth, flange back distance (FBD), flange focal length (FFL), back focus [1] or register, depending on the usage and source) of a lens mount system is the distance from the ...
The camera can be then be held steady at waist level. Although the viewfinder lens was similar to the camera lens, the optical quality was less important and so the cost is reduced. TLR viewfinders do not have the interrupted viewing and shutter lag of the SLR type and so is preferred for dance photography. [2]