Search results
Results from the WOW.Com Content Network
A camera's on-board monitor. While the traditional video tap no longer applies to modern CCD based cameras, large-scale productions with HD cameras still use video assist in its wider meaning. In this case, the video signal is fed from the camera's own video output, and is a significantly better quality than the original video tap technology.
These can be efficiently hidden from just one camera but can be more complicated to set up and their placement may be inferior in a multiple-camera setup. Another drawback is in the usage of recording capacity, as a four-camera setup may use (depending on the cameras involved) up to four times as much film (or digital storage space) per take ...
960H is a resolution used in analog CCTV equipment. 960H represents the number of horizontal pixels in a video signal transmitted from a camera or received by a DVR (Digital Video Recorder). The resolution of 960H depends on whether the equipment is PAL or NTSC based: 960H represents 960 x 576 (PAL) or 960 x 480 (NTSC) pixels.
Miracast is a wireless communications standard created by the Wi-Fi Alliance which is designed to transmit video and sound from devices (such as laptops or smartphones) to display receivers (such as TVs, monitors, or projectors).
Cameras and monitors may use any of these modes. Video captured in progressive mode can be recorded, broadcast, or streamed in progressive or progressive segmented frame modes. Video captured using an interlaced mode must be distributed as interlace unless a de-interlace process is applied in post production.
Dolby Vision is a set of technologies developed by Dolby Laboratories for high dynamic range (HDR) video. [1] [2] [3] It covers content creation, distribution, and playback.[1] [4] [5] [6] It includes dynamic metadata that define the aspect ratio and adjust the picture based on a display's capabilities on a per-shot or even per-frame basis, optimizing the presentation.
Alternatively, a tally light can be a separate device mounted on the camera body, lens, or tripod, but not connected to the camera electronically. In some (mainly non-studio) cameras, the tally light is implemented as a special UI element displayed on the screen (e.g. red outline around the frame).
The technical director's station, with waveform monitors, vectorscopes and the camera control units (CCU) or remote control panels (RCPs) for the CCUs which are used to control the professional video cameras in the studio floor; In many facilities, a lighting control console used to control the lighting on the studio floor