Search results
Results from the WOW.Com Content Network
A block diagram of a PID controller in a feedback loop. r(t) is the desired process variable (PV) or setpoint (SP), and y(t) is the measured PV. The distinguishing feature of the PID controller is the ability to use the three control terms of proportional, integral and derivative influence on the controller output to apply accurate and optimal ...
A simplified PID regulator used for a voltage control mode in a STATCOM To control the operation of a STATCOM when in voltage control mode, a closed loop , PID regulator is typically used, which allows for feedback on how changing the current flow is affecting the system voltage.
The "P" (proportional) gain, is then increased (from zero) until it reaches the ultimate gain, at which the output of the control loop has stable and consistent oscillations. K u {\displaystyle K_{u}} and the oscillation period T u {\displaystyle T_{u}} are then used to set the P, I, and D gains depending on the type of controller used and ...
A motor requiring a DC power supply for operation is termed a DC motor. DC motors are widely used in control applications like robotics, tape drives, machines and many more. Separately excited DC motors are suitable for control applications because of separate field and armature circuit. [1]
In vector control, an AC induction or synchronous motor is controlled under all operating conditions like a separately excited DC motor. [21] That is, the AC motor behaves like a DC motor in which the field flux linkage and armature flux linkage created by the respective field and armature (or torque component) currents are orthogonally aligned such that, when torque is controlled, the field ...
A feed back control system, such as a PID controller, can be improved by combining the feedback (or closed-loop control) of a PID controller with feed-forward (or open-loop) control. Knowledge about the system (such as the desired acceleration and inertia) can be fed forward and combined with the PID output to improve the overall system ...
Its name comes from the information path in the system: process inputs (e.g., voltage applied to an electric motor) have an effect on the process outputs (e.g., speed or torque of the motor), which is measured with sensors and processed by the controller; the result (the control signal) is "fed back" as input to the process, closing the loop.
Simulink 5.0.2 2002 6.5.1 R13SP1 Simulink 5.1 2003 6.5.2 R13SP2 Simulink 5.2 7 R14 Simulink 6.0 2004 7.0.1 R14SP1 Simulink 6.1 7.0.4 R14SP2 Simulink 6.2 2005 7.1 R14SP3 Simulink 6.3 7.2 R2006a Simulink 6.4 2006 7.3 R2006b Simulink 6.5 7.4 R2007a Simulink 6.6 2007 7.5 R2007b Simulink 7.0 Last release for Windows 2000 and PowerPC Mac. 7.6 R2008a