enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Another setup option of staggered wheel fitment is called double staggered, having smaller diameter narrow width wheels in the front with larger diameter and wider width wheel in the back. For example, a vehicle may feature 18 in × 8 in (460 mm × 200 mm) wheels in front and 19 in × 10 in (480 mm × 250 mm) in the rear.

3. Rim (wheel) - Wikipedia

   en.wikipedia.org/wiki/Rim_(wheel)

   An example is a 35 mm tire on a rim with an ETRTO 17 mm internal width, or one-and-a-half times the rim's external width. Considerable variation outside this range is safe, but very wide tires on a narrow rim can overstress the rim and damage the tire sidewalls, whereas very narrow tires on a wide rim give a hard ride and can result in a high ...

4. Axle track - Wikipedia

   en.wikipedia.org/wiki/Axle_track

   Track (measured between center line of wheels) In automobiles (and other wheeled vehicles which have two wheels on an axle), the axle track is the distance between the hub flanges on an axle. [1] Wheel track, track width or simply track refers to the distance between the centerline of two wheels on the same axle. In the case of an axle with ...

5. Wheelbase - Wikipedia

   en.wikipedia.org/wiki/Wheelbase

   Wheelbase (measured between rotational centers of wheels) Bike geometry parameters: The wheelbase of a bicycle. In both road and rail vehicles, the wheelbase is the horizontal distance between the centers of the front and rear wheels. For road vehicles with more than two axles (e.g. some trucks), the wheelbase is the distance between the ...

6. Wheel - Wikipedia

   en.wikipedia.org/wiki/Wheel

   An aluminum alloy wheel. The rim is the "outer edge of a wheel, holding the tire". [47] It makes up the outer circular design of the wheel on which the inside edge of the tire is mounted on vehicles such as automobiles. For example, on a bicycle wheel the rim is a large hoop attached to the outer ends of the spokes of the wheel that holds the ...

7. List of gear nomenclature - Wikipedia

   en.wikipedia.org/wiki/List_of_gear_nomenclature

   Offset. Offset is the perpendicular distance between the axes of hypoid gears or offset face gears. [1] In the adjacent diagram, (a) and (b) are referred to as having an offset below center, while those in (c) and (d) have an offset above center. In determining the direction of offset, it is customary to look at the gear with the pinion at the ...