Search results
Results from the WOW.Com Content Network
The centimetre (SI symbol: cm) is a unit of length in the metric system equal to 10 −2 metres ( 1 / 100 m = 0.01 m). To help compare different orders of magnitude, this section lists lengths between 10 −2 m and 10 −1 m (1 cm and 1 dm). 1 cm – 10 millimeters; 1 cm – 0.39 inches; 1 cm – edge of a square of area 1 cm 2
In firearm optics, where 0.1 mrad per click is the most common mrad based adjustment value, another common rule of thumb is that an adjustment of 1 / 10 mrad changes the impact as many centimeters as there are hundreds of meters. In other words, 1 cm at 100 meters, 2.25 cm at 225 meters, 0.5 cm at 50 meters, etc. See the table below
While this is an error, it can often be assumed to be equal to the traditional μS/cm. Often, by typographic limitations μS/cm is expressed as uS/cm. The conversion of conductivity (in μS/cm) to the total dissolved solids (in mg/kg) depends on the chemical composition of the sample and can vary between 0.54 and 0.96.
The conversion factor is 10 8 maxwell per weber, since flux is the integral of field over an area, area having the units of the square of distance, thus 10 4 G/T (magnetic field conversion factor) times the square of 10 2 cm/m (linear distance conversion factor). 10 8 Mx/Wb = 10 4 G/T × (10 2 cm/m) 2.
111 m: 102 m: 78.7 m: 43.5 m 4 0.0001: 0° 00′ 0.36″ individual street, large buildings: 11.1 m: 10.2 m: 7.87 m: 4.35 m 5 0.00001: 0° 00′ 0.036″ individual trees, houses: 1.11 m: 1.02 m: 0.787 m: 0.435 m 6 0.000001: 0° 00′ 0.0036″ individual humans: 111 mm: 102 mm: 78.7 mm: 43.5 mm 7 0.0000001: 0° 00′ 0.00036″ practical limit ...
Height measurement using a stadiometer. Human height or stature is the distance from the bottom of the feet to the top of the head in a human body, standing erect.It is measured using a stadiometer, [1] in centimetres when using the metric system or SI system, [2] [3] or feet and inches when using United States customary units or the imperial system.
A metric ISO screw thread is designated by the letter M followed by the value of the nominal diameter D (the maximum thread diameter) and the pitch P, both expressed in millimetres and separated by a dash or sometimes the multiplication sign, × (e.g. M8-1.25 or M8×1.25). If the pitch is the normally used "coarse" pitch listed in ISO 261 or ...
∆ may refer to: . Triangle (∆), one of the basic shapes in geometry. Many different mathematical equations include the use of the triangle.; Delta (letter) (Δ), a Greek letter also used in mathematics and computer science