Search results
Results from the WOW.Com Content Network
A Z-source inverter is a type of power inverter, a circuit that converts direct current to alternating current. The circuit functions as a buck-boost inverter without making use of DC-DC converter bridge due to its topology. Impedance (Z) source networks efficiently convert power between source and load from DC to DC, DC to AC, and from AC to ...
The PWM's leading edge is held at the leading edge of the window and the trailing edge is modulated. Trailing edge modulation (middle plot) uses a normal sawtooth wave to generate the PWM. The PWM's trailing edge is fixed and the leading edge is modulated. Centered pulses (bottom) uses a triangle waveform to generate the PWM.
An AC-AC converter with approximately sinusoidal input currents and bidirectional power flow can be realized by coupling a pulse-width modulation (PWM) rectifier and a PWM inverter to the DC-link. The DC-link quantity is then impressed by an energy storage element that is common to both stages, which is a capacitor C for the voltage DC-link or ...
Input stages of AC-drive converter systems. Figure 2 shows the top and bottom views of an air-cooled 10 kW-Vienna Rectifier (400 kHz PWM), with sinusoidal input current s and controlled output voltage. Dimensions are 250mm x 120mm x 40mm, resulting in a power density of 8.5 kW/dm 3. The total weight of the converter is 2.1 kg [10]
VCOs can be generally categorized into two groups based on the type of waveform produced. [4]Linear or harmonic oscillators generate a sinusoidal waveform. Harmonic oscillators in electronics usually consist of a resonator with an amplifier that replaces the resonator losses (to prevent the amplitude from decaying) and isolates the resonator from the output (so the load does not affect the ...
This type of inverter produces an approximately sinusoidal waveform at a high output frequency, ranging from 20 kHz to 100 MHz, and is commonly used in relatively fixed output applications, for example, induction heating, sonar transmitters, fluorescent lighting, or ultrasonic generators. Due to the high switching frequency, the size of the ...
PSIM is an Electronic circuit simulation software package, designed specifically for use in power electronics and motor drive simulations but can be used to simulate any electronic circuit. Developed by Powersim, PSIM uses nodal analysis and the trapezoidal rule integration [2] as the basis of its simulation algorithm. PSIM provides a schematic ...
A digital pattern generator is a piece of electronic test equipment or software used to generate digital electronic stimuli. Digital electronics stimuli are a specific kind of electrical waveform varying between two conventional voltages that correspond to two logic states ("low state" and "high state", "0" and "1").