Search results
Results from the WOW.Com Content Network
The 7.62×39mm (also called 7.62 Soviet, formerly .30 Russian Short) [5] round is a rimless bottlenecked intermediate cartridge of Soviet origin. The cartridge is widely used due to the global proliferation of the AK-47 rifle and related Kalashnikov-pattern rifles, the SKS semi-automatic rifle, and the RPD/RPK light machine guns.
The overall case length after the shortening and re-sizing is 1.565". The cartridge was designed to use .308" diameter bullets in weights of 110 to 150 grains, with a standard twist rate of 1-12". [1] Wilson Combat states that heavier bullets can be used in a barrel with a 1-8" twist rate for subsonic loads. [4]
The .308 Winchester has a 3.64 mL (56 gr H 2 O) cartridge case capacity. [9] The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt-action rifles and machine guns alike, under extreme conditions. .308 Winchester maximum C.I.P. cartridge dimensions. All dimensions in millimeters (mm) and inches.
The 7.62 mm designation refers to the internal diameter of the barrel at the lands (the raised helical ridges in rifled gun barrels). The actual bullet caliber is often 7.82 mm (0.308 in), although Soviet weapons commonly use a 7.91 mm (0.311 in) bullet, as do older British (.303 British) and Japanese (7.7×58mm Arisaka) cartridges.
The 9×39 is based on the Soviet 7.62×39mm case but with the neck expanded to fit a 9.2mm bullet. The final design was completed by N. Zabelin, L. Dvoryaninova, and Y. Frolov of the TsNIITochMash in the 1980s. The intent was to create a more stealthy cartridge for suppressed firearms used by Spetsnaz and other special troops that had more ...
The .308×1.5" was one of the original short fat cartridge designs, having a length to width ratio of 3.17. The short fat cartridge design is considered to promote efficiency and shot to shot consistency. The .308×1.5" Barnes cartridge is comparable to cartridges such as the 7.62×39mm and the .30-30 Winchester. The .308×1.5" is capable of ...
The .30-06 Springfield cartridge (7.62×63mm), with its higher service pressure and case capacity, will outperform the 7.62×54mmR when same-length test barrels are used, though this is very uncommon as .30-06 Springfield firearms are generally sold with much shorter barrels than 7.62×54mmR firearms. [4]
The 7.62mm UKM [7.62×57mm] is a specialized rimless bottlenecked centerfire cartridge developed for long-range rifles.The commercially successful .338 Lapua Magnum cartridge has functioned as the parent case for the 7.62mm UKM, which is essentially a necked-down shortened version of the .338 Lapua Magnum.